Characteristics:
1. DFC-200 truck mounted portable water well drilling rig is designed by our engineers; it adopts truck  mounted and is a rotary drilling rig.
Â
2. The truck chassis  adopts  the special crane chassis of brand CHANAN TRUCK, the mainÂ
transmit, transmission power, gearbox, sets of windlass, mud pump, sewage pump,mast are setÂ
up on the chassis.
Â
3. This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2AÂ
mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it isÂ
equipped with a good drilling bit.
Â
4. The power of drilling rig comes from the truck engine, the rig sets up distribute implement andÂ
hydraulic system.
Â
5. We can upset the spare electric engine and clutch implement according to client's requirement,Â
so that the rig can work with diesel engine or electric engine.
Â
6. One set of 100Kw generator has been set on the chassis, it will supply the power to drilling rig, andÂ
it is convenient to illuminate or work at night.
Â
7. The adding pressure device is hydraulic, so it has a high efficiency when the rig drill on mudÂ
rock and weathering formation through using the adding pressure implement.
Â
8. The master driving of rig is mechanical, the four jacks and mast are hydraulic operated.Â
Distribute box, sewage pump, master driving clutch system are air operated.
DFC-200 drilling rig can both work with mud pump and air compressor&DTH Drilling Tools.
|
Drilling depth(M) |
200 |
|
|
 Drilling diameter(mm) |
500 |
|
|
 Speed of turntable(r/min) |
6.7;10;17;43;63;108(reverse) |
|
|
 Torque of turntable(KN.m) |
14.5;9.7;5.7;2.3;1.5;0.9(reverse) |
|
|
plunger pump |
BW850/2A |
 |
|
Truck chassis |
 Drive form |
6×4 |
|
 The highest speed (Km/h) |
75 |
|
|
 Weight(kg) |
17340 |
|
|
 Working size(L*W*H)(mm) |
10032*3570*11459 |
|
Â
Please contact Andrew for more details and best offer
Mobil: 0086-18681448031
Office line: 0086-371-55819257
Website: www.zzdefydrillrig.com, www.cndrillingrigmachine.com
Facebook: www.facebook.com/drillingrigmachine DFC-200 large well caliber truck mounted hydraulic hard rock drilling machine
Characteristics:
1. DFC-200 truck mounted portable water well drilling rig is designed by our engineers; it adopts truck  mounted and is a rotary drilling rig.
Â
2. The truck chassis  adopts  the special crane chassis of brand CHANAN TRUCK, the mainÂ
transmit, transmission power, gearbox, sets of windlass, mud pump, sewage pump,mast are setÂ
up on the chassis.
Â
3. This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2AÂ
mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it isÂ
equipped with a good drilling bit.
Â
4. The power of drilling rig comes from the truck engine, the rig sets up distribute implement andÂ
hydraulic system.
Â
5. We can upset the spare electric engine and clutch implement according to client's requirement,Â
so that the rig can work with diesel engine or electric engine.
Â
6. One set of 100Kw generator has been set on the chassis, it will supply the power to drilling rig, andÂ
it is convenient to illuminate or work at night.
Â
7. The adding pressure device is hydraulic, so it has a high efficiency when the rig drill on mudÂ
rock and weathering formation through using the adding pressure implement.
Â
8. The master driving of rig is mechanical, the four jacks and mast are hydraulic operated.Â
Distribute box, sewage pump, master driving clutch system are air operated.
DFC-200 drilling rig can both work with mud pump and air compressor&DTH Drilling Tools.
|
Drilling depth(M) |
200 |
|
|
 Drilling diameter(mm) |
500 |
|
|
 Speed of turntable(r/min) |
6.7;10;17;43;63;108(reverse) |
|
|
 Torque of turntable(KN.m) |
14.5;9.7;5.7;2.3;1.5;0.9(reverse) |
|
|
plunger pump |
BW850/2A |
 |
|
Truck chassis |
 Drive form |
6×4 |
|
 The highest speed (Km/h) |
75 |
|
|
 Weight(kg) |
17340 |
|
|
 Working size(L*W*H)(mm) |
10032*3570*11459 |
|
Â
Please contact Andrew for more details and best offer
Mobil: 0086-18681448031
Office line: 0086-371-55819257
Website: www.zzdefydrillrig.com, www.cndrillingrigmachine.com
Facebook: www.facebook.com/drillingrigmachine
Needle assembly machine is only one kind of needle manufacturing machines. We offer many different automatic needle assembly machines. The main one is hypodermic needle assembly machine. It is used to assemble ready needle cannula, needle hub and needle cap to be a finished needle. This process is fully automatic.
Besides, other needle assembly machines like safety needle assembly machine, blood collection needle assembly machine, Novo pen needle assembly machine etc are also offered.
Technical Parameter:
Name: Fully Automatic Hypodermic Needle Assembly Machine
Operation of worker: 1 operator
Dimension: 7000*3400*1600mm
Capacity: 45000 pieces per hour ( for master )
FAQ:
1. Are you a manufacturer?
Yes, we are the professional manufacturer set up in 1992, located at a beautiful town of Zhejiang Province.
2. Can you provide the oversea service?
Yes, after the machines arrive at your factory, we will arrange engineers go to install the machine and train your operators.
3. Can we visit your factory?
Of course. We highly welcome clients come to visit our factory. It will be our great honor to meet you.
4. How can you guarantee the quality?
100% qualified products before the delivery. The clients can inspect the products at our factory.
1 year warranty ( failure caused by machine quality ) from the equipment arrive at the client`s factory. Lifetime maintenance and offer for the spare parts.
Needle Assembly Machine
Needle Assembly Machine,Needle Machine,Syringe Needle Assembly Machine,Syringe Needle Machine
Yuhuan Zhengri Technology Co., Ltd. , http://www.syringemachine.com