4inch Centrifugal Deep Well Submersible Water Feed Pump

Model NO.: MSS
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Verticaljoint Surface Pump
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Theory: Centrifugal Pump
Structure: Single-Stage Pump
Power: Electric
Material: Cast Iron, Stainless Steel
Wet End: A05, A07, A49, Rubber, Polyurethane
Bearing: NSK, SKF, Timken
Sealing: Mechanical Seal, PTFE Packing, Hi-Seal
Lubrication: Grease and Oil
Color: Customer Specifications Upon Request
Standard or Nonstandard: Standard
Trademark: Modo
Transport Package: Wooden Case
Specification: SGS ISO
Origin: Hebei China
HS Code: 8413810090
Model NO.: MSS
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Verticaljoint Surface Pump
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Theory: Centrifugal Pump
Structure: Single-Stage Pump
Power: Electric
Material: Cast Iron, Stainless Steel
Wet End: A05, A07, A49, Rubber, Polyurethane
Bearing: NSK, SKF, Timken
Sealing: Mechanical Seal, PTFE Packing, Hi-Seal
Lubrication: Grease and Oil
Color: Customer Specifications Upon Request
Standard or Nonstandard: Standard
Trademark: Modo
Transport Package: Wooden Case
Specification: SGS ISO
Origin: Hebei China
HS Code: 8413810090
4inch Centrifugal Deep Well Submersible Water Feed Pump

4inch Centrifugal Deep Well Submersible Water Feed Pump


Characteristics
 
·Type: ·Media: ·Application:
centrifugal clean water transporting
·Other characteristics: ·Flow rate: ·Head
multi-stage Min.:0m3/h Min.: 0m
  Max.: 100m3/h Max.: 400m
·Priming    
submersible    



Description

This product is the water supply equipment of motor and pump straight connect work.
Frequency 50 hlZ, rated voltage 380 V (allow tolerance ± 5%) of the three-phase AC.


Application

River reservoir
Water Treatment
Building Services
Irrigation
Civil Construction
Industry
Municipal
Processing




Water quality requirements

General no corrosive clean water;
Solid matter content of no more than 0.01% (weight ratio);
PH value 6.5-8.5;
Chlonne ion content is no more than 400 mg/L, hydrogen sulphide-no more than 1.5 mg/L;
Water temperature is not higher than 20 degree.

Start - Running - Parking

• Start:
1 Before starting, with 500 V M D meter to measure the grounding insulation resistance value of electric
pump should be not less than 5 MQ. (usually get data in 12 hours after installation). •2 when starting ,
observe the current, voltage is an accordance with the prescribed scope, or abnormal sound operation and
vibration phenomenon, if abnormal should be solved in time.

• Running:
In the running of electric pump keep observe the voltage, current, the change of flow and head,
if find one of the following descriptions, stop mnning.

The current under rated voltage, which more than rated value;
Under rated head, the drop value of flow bigger than the normal position;
insulation resistance below 0.5 M n;
internnittently water come out from pump;
Pumps have suddenly sound or larger vibration;



Allow Horizontal or obliquely installation range
 
No. Overall dimension Type Submersible motor power range
1 150 (6'') QN/QM6'' 3-11kw
2 200(8'') 1218a/2, QN/QM10'' 1218a/a 5.5-22kw            QN/QM8'' 5.5-30KW
3 250(10'') 1222a/2, QN/QM10'' 30-55KW
4 300(12'') 12228/2 75-140KW
5 12228/4 33-87KW
6 400(16'') 1234/2 160-260KW
7 1234/4 87-160KW
8 500(20'') 1142/2 380V 300KW below,              3KV 260-420kW
9 1142/4 380V 160-300kw,                 3KV 150-260kW

Submersible Pump Depth of the Well Cable Select Tables
 
  1.5 2.5 4 6 10 16 25 35 50 75 95 120 150 Area
10 105 180 270                      
12 90 150 230 340                    
16 65 110 170 250                    
20 55 90 135 200 330                  
25 43 70 110 160 270                  
30 36 60 90 135 220 350                
40   45 70 100 170 260                
50     55 80 135 210 330              
60       70 110 170 270              
70       60 95 150 230 320            
80         85 130 200 280            
90         75 115 180 250            
100         65 105 160 220 320          
110           95 145 200 290          
120           85 130 180 260          
140           75 115 160 230 310        
160             100 140 200 270        
180             90 125 180 240 320      
200 Power Length 110 160 210 290      
220               100 145 190 260 330    
250                 125 170 230 290    
280                 115 155 205 260 325  
320                 100 135 180 225 285  
400                 90 120 160 200 250  
450                   110 144 180 225  
500                   95 130 160 200  
560                     115 145 180  
630                     100 130 160  
700                       115 145  
Current                         130  


Details




FAQ

A: What kind of company you are?
Q: We are centrifugal pump manufacture located in Boy Town, Baoding, China, with more than 20years experiences. We were gaining good reputation among our customers for our professional, warm and thoughtful service. Because we know that a long terms business based on the quality control, price, packing, delivery time etc.
 
A: What's the quality assurance you provided and how do you control quality?
Q: Established a procedure to check products at all stages of the manufacturing process: Casting, Heat treatment, Machining, Assembly, and Testing.
 
Q: Can you install the motor or diesel engine with the pump for us?
A: yes, we can, it's no problem, and we are experienced in this.
 
Q: What's your MOQ?
A: Trial sample order is OK.
 
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A......
 
Q: What certificates do you have?
A: CE, ISO 2008, UL.....
 
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
 
Q: What is the delivery time?
A: 15-30 days according to customer quantities.
 
Q: Can you do OEM brand?
A: Yes, Welcome.
 
Q: What information should I offer to get pump solution?
1, Material:
2, Head:     m
3, Flow:    m3/h
4, Medium size:    mm
5, Particle shape (smooth or sharp):
6, Medium pH level:
7, Temperature:
8, Drive type:
9. Power supply:



4inch Centrifugal Deep Well Submersible Water Feed Pump



  4inch Centrifugal Deep Well Submersible Water Feed Pump

4inch Centrifugal Deep Well Submersible Water Feed Pump


Characteristics
 
·Type: ·Media: ·Application:
centrifugal clean water transporting
·Other characteristics: ·Flow rate: ·Head
multi-stage Min.:0m3/h Min.: 0m
  Max.: 100m3/h Max.: 400m
·Priming    
submersible    



Description

This product is the water supply equipment of motor and pump straight connect work.
Frequency 50 hlZ, rated voltage 380 V (allow tolerance ± 5%) of the three-phase AC.


Application

River reservoir
Water Treatment
Building Services
Irrigation
Civil Construction
Industry
Municipal
Processing




Water quality requirements

General no corrosive clean water;
Solid matter content of no more than 0.01% (weight ratio);
PH value 6.5-8.5;
Chlonne ion content is no more than 400 mg/L, hydrogen sulphide-no more than 1.5 mg/L;
Water temperature is not higher than 20 degree.

Start - Running - Parking

• Start:
1 Before starting, with 500 V M D meter to measure the grounding insulation resistance value of electric
pump should be not less than 5 MQ. (usually get data in 12 hours after installation). •2 when starting ,
observe the current, voltage is an accordance with the prescribed scope, or abnormal sound operation and
vibration phenomenon, if abnormal should be solved in time.

• Running:
In the running of electric pump keep observe the voltage, current, the change of flow and head,
if find one of the following descriptions, stop mnning.

The current under rated voltage, which more than rated value;
Under rated head, the drop value of flow bigger than the normal position;
insulation resistance below 0.5 M n;
internnittently water come out from pump;
Pumps have suddenly sound or larger vibration;



Allow Horizontal or obliquely installation range
 
No. Overall dimension Type Submersible motor power range
1 150 (6'') QN/QM6'' 3-11kw
2 200(8'') 1218a/2, QN/QM10'' 1218a/a 5.5-22kw            QN/QM8'' 5.5-30KW
3 250(10'') 1222a/2, QN/QM10'' 30-55KW
4 300(12'') 12228/2 75-140KW
5 12228/4 33-87KW
6 400(16'') 1234/2 160-260KW
7 1234/4 87-160KW
8 500(20'') 1142/2 380V 300KW below,              3KV 260-420kW
9 1142/4 380V 160-300kw,                 3KV 150-260kW

Submersible Pump Depth of the Well Cable Select Tables
 
  1.5 2.5 4 6 10 16 25 35 50 75 95 120 150 Area
10 105 180 270                      
12 90 150 230 340                    
16 65 110 170 250                    
20 55 90 135 200 330                  
25 43 70 110 160 270                  
30 36 60 90 135 220 350                
40   45 70 100 170 260                
50     55 80 135 210 330              
60       70 110 170 270              
70       60 95 150 230 320            
80         85 130 200 280            
90         75 115 180 250            
100         65 105 160 220 320          
110           95 145 200 290          
120           85 130 180 260          
140           75 115 160 230 310        
160             100 140 200 270        
180             90 125 180 240 320      

Cnc Lathe is suitable for the turning of cylindrical surface, bore, thread cutting, arc surface and etc. CNC Lathe has been widely used to produce spare parts for the mechanical industry, motorcycle industry, automobile industry, oil pump, medical industry and etc.

Features:

1. The CNC lathe frame is made from HT300 cast iron and the frame is integrated with bed foot made of one-piece casting. The width of bed`s guide rail reaches 440mm. All of them guarantee that this lathe has high rigidity and stability.

2. The basic components of CNC lathe are made of resin sand casting and processed with aging treatment. The guide rails have been treated with high-frequency quenching and fine machining to guarantee the lathe`s long-term stability.

3. The main drive system of CNC lathe adopts manual control and consists of three gears (low, medium, high gears). Equipped with encoder, it can realize stepless speed regulation. The main spindle adopts high-precision special spindle which is suitable for heavy machining, as it has the distinctive features of high precision, high rigidity, small thermal deformation, smooth running and little noise.

4. The longitudinal and transversal feeding systems adopt semi-closed loop control. They are driven by servo motors and the power is transmitted by high precision ball screws. The pulse encoder will send feedback to test positioning accuracy.

5. The guide surface for longitudinal and transversal feeding systems is pasted with plastic which has little friction resistance and avoids low-speed climbing.

6. Hydraulic, pneumatic chuck and hydraulic or pneumatic tailstock is optional.

7. The lathe adopts centralized automatic lubrication system which can reduce the wearing of moving parts and prolong their service life.


CNC Lathe

Automatic Lathe,Cnc Machine Tools,Cnc Horizontal Turning Lathe

Shandong Zecheng CNC Machinery Co., Ltd , http://www.zccncmachinery.com

Posted on