8inch 84kw Diesel Water Pump with Outflow 374m3/H Lift 70m

Example specification: 12inch 49HP Cummins water pump for flood control with trailer

Specific Case characterization : 
Diesel engine parameters:
1)Model:Cummins 4BT3.9-G1
2)Rated output(KW):36KW(49HP)
3)Rated speed(r/min):1500
4)Starting method: Electric motor 24V DC
5)Cooling method: Water cooled
6)Governing method: Mechanical/Electronic governing(Optional)
7)Intake method: Turbocharged intercooled
8)Cylinders:4
9)Bore/Stroke:102/120mm
10)Type: in line,4 stroke, humid liner, direct injection
 
Water pump parameters:
1)Model:12SH-28A
2)Type: Single stage, double suction, centrifugal
3)Outflow:685m3/h
4)Head:10m
5)Shaft power:23.3KW
6)Inlet diameter:300mm
7)Outlet diameter:250mm
8)Impeller diameter: mm
9)Casing material: cast iron
10)Shaft material: cast iron
11)Impeller material:cast iron
12)Sealing method: Stuffing sealing/Mechanical sealing(Optional)
 
Control system(OPTIONAL):
1)AMF/ATS function
2)Warning of oil low pressure, slow speed, high water temperature, high oil temperature etc
3)Display functions with warning ,Auto start and stop
4)Weather canopy,trailer type,movalbe type,silent case

Quality Gurantee:1year/1000working hours(the first reach is valid )

======================================================================================

Diesel Water Pump Introduction
Automatic diesel pump can selected by usage places head ,capacity and liquid request ;
According to requirements of matching different working conditions, can choose single-stage suction centrifugal pump , high pressure pump, double suction split casing pump , and so on. Products with advanced technology and a high degree of automatic, superior performance and protection function is complete, reasonable structure, easy to install, cost-effective high when a sudden blackout of the factory, emergency water supply pump set of diesel engine starts automatically add pipe network pressure.
 
Pump ranging
Capacity : 10-27000m3/h
Head: 10-15000m
Pressure: 0.1MPa-150MPa
Power: 3-2250kw

Applications: 
  
Specification of our self priming pump  
Diesel Engine Specification:
Product details:
1. SN Non-clogging Dewatering Pump consists of a self-priming centrifugal pump with semi-open impeller and a simplex separator where air can separate from the liquid and be sucked by a Vacuum Pump, the max suction head can reach to 9.5m 
2. IS Single Stage End Suction Water Pump is for clean water or liquid similar to clean water, with high temperature mechanical seal it can be used to transfer hot water (150 degree celcius). It is used for industrial and city clean water supply and drainage, irrigation, fire protection, water supply, metallurgy, chemical, paper making, etc. 
3. S/XS High Flow Split Case Water Pump with high capacity and pressure, which can transfer clean water or similar liquids (Oil).  
4. D High Pressure Multistage Water Pump is used system of high-pressure run hot and cold water circulation and booster pumps in parallel water supply of the high rise building, fire, boiler feed water and cooling water systems and a variety of irrigation fluid conveying.  
5. ZX/ZW/SP Self Priming Water Pump is our latest generation product base on US technology and craftwork. It is designed for economical & trouble-free operation in handling solid-laden liquids and slurries. 
7. LQRY Hot Oil Pump is suitable for heat-conduction oil, or other hot oils with temperature ≤370°C 
8. XBC Diesel Fire Water Pump comprise a combination of electric motor pump, diesel engine pump and jockey pump that used for fire fighting systems. Fire pumps are required to comply with Local Civil Defense Authority regulations and International Codes of Practice e.g. National Fire Protection Association (NFPA). 
   
There are also IS,OS,SH,D,DG,DM,ZX,ZW,HW,ZJ,ZG,QW,IH,QJ,2SK,2BV,Vacuum pumps, PLUNGER PUMPS,PISTON PUMPS,SCREW PUMPS,MUD PUMPS and so on.
  
Company Overview:
Weifang Sunny Power Machinery Co.,LTD.
is specialized in manufacture of multiple pumps and other relative power machinery, 
integrating the scientific research , development, design ,
manufacture, production, testing, and sales service for many years. 
Our company introduce the international advanced production equipment and technology , 
combines the strong technical experience and method , 
develop and research different sorts of pump products. 
Continuous innovate the products according to the customers needs,
the products have stable performance and quality.
there are many products are exported to some countries and regions, 
won the trust of customers all around the world .  
The main production of products: 
all kinds of centrifugal pump, 
mining industry clear water pump, 
boiler feed water pump, 
slurry pump, 
submersible pumps, 
sewage pumps, fire pumps, 
vacuum pumps,
water circulation pump, 
submersible pumps, 
automatic frequency conversion water supply equipment, 
sewage disposal equipment, 
widely used in metallurgy, coal, mining, power,chemical, 
pharmaceutical, city water supply and drainage industry,
plays huge role in the national economic construction. 
We sincerely hope :
we can cooperation with the domestic and international friends. 
We will try our best to provide the best quality ,
reasonable price and excellent service to every customers.
 
FAQ: 
1 / Q: Are you a manufactory or trading company ?
A: We are water pump manufactory with more than 30 years production experience. 
2 / Q: What's your MOQ?
A: Trial sample order is OK . 
3 / Q: What's your payment terms?
A: T/T , L/C , D/P, D/A ...... 
4 / Q: What certificates do you have ?
A: CE , ISO 9001 , UL ..... 
5 / Q: How about the warranty ?
A: One year warranty for pumps . 
6 / Q: What is the delivery time ?
A: 15-30 days according to customer quantities . 
7 / Q: Can you do OEM brand ?
A: Yes, Welcome . 
8 / Q: How to buy our pumps ?
A: Firstly we should know from you :
What is the fluid ? 
Clean water(temperature), dirty water(temperature), particles,or slurry ? 
What is the capacity and head ?
The capacity and head range ?
What is the voltage and frequency of three phase electrcity ?
Other conditions from customer if possible : pump type , motor ? 
With complete information, then we selected the pump and feedback to you. 
If you have special requirement, such material, please inform us . 
9 / Q: Quality reliable ?
A: We have cooperated with customers from European, Asia, Africa, 
Middle east, Australia, North and south America for more than 20 years, 
Quality if life and we observe international standards on each kind of pumps .
10 / Q: How to replace parts ?
A: In the order period, we will list our vulnerable parts and their quantities to 
our customer, and sold at competitive price, then ship together with pumps if 
customer needs. 
FOR MORE QUESTIONS, PLEASE CONTACT OUR SALES MANAGER.
 
 














  Example specification: 12inch 49HP Cummins water pump for flood control with trailer

Specific Case characterization : 
Diesel engine parameters:
1)Model:Cummins 4BT3.9-G1
2)Rated output(KW):36KW(49HP)
3)Rated speed(r/min):1500
4)Starting method: Electric motor 24V DC
5)Cooling method: Water cooled
6)Governing method: Mechanical/Electronic governing(Optional)
7)Intake method: Turbocharged intercooled
8)Cylinders:4
9)Bore/Stroke:102/120mm
10)Type: in line,4 stroke, humid liner, direct injection
 
Water pump parameters:
1)Model:12SH-28A
2)Type: Single stage, double suction, centrifugal
3)Outflow:685m3/h
4)Head:10m
5)Shaft power:23.3KW
6)Inlet diameter:300mm
7)Outlet diameter:250mm
8)Impeller diameter: mm
9)Casing material: cast iron
10)Shaft material: cast iron
11)Impeller material:cast iron
12)Sealing method: Stuffing sealing/Mechanical sealing(Optional)
 
Control system(OPTIONAL):
1)AMF/ATS function
2)Warning of oil low pressure, slow speed, high water temperature, high oil temperature etc
3)Display functions with warning ,Auto start and stop
4)Weather canopy,trailer type,movalbe type,silent case

Quality Gurantee:1year/1000working hours(the first reach is valid )

======================================================================================

Diesel Water Pump Introduction
Automatic diesel pump can selected by usage places head ,capacity and liquid request ;
According to requirements of matching different working conditions, can choose single-stage suction centrifugal pump , high pressure pump, double suction split casing pump , and so on. Products with advanced technology and a high degree of automatic, superior performance and protection function is complete, reasonable structure, easy to install, cost-effective high when a sudden blackout of the factory, emergency water supply pump set of diesel engine starts automatically add pipe network pressure.
 
Pump ranging
Capacity : 10-27000m3/h
Head: 10-15000m
Pressure: 0.1MPa-150MPa
Power: 3-2250kw

Applications: 
  
Specification of our self priming pump  
Diesel Engine Specification:
Product details:
1. SN Non-clogging Dewatering Pump consists of a self-priming centrifugal pump with semi-open impeller and a simplex separator where air can separate from the liquid and be sucked by a vacuum pump, the max suction head can reach to 9.5m 
2. IS Single Stage End Suction Water Pump is for clean water or liquid similar to clean water, with high temperature mechanical seal it can be used to transfer hot water (150 degree celcius). It is used for industrial and city clean water supply and drainage, irrigation, fire protection, water supply, metallurgy, chemical, paper making, etc. 
3. S/XS High Flow Split Case Water Pump with high capacity and pressure, which can transfer clean water or similar liquids (Oil).  
4. D High Pressure Multistage Water Pump is used system of high-pressure run hot and cold water circulation and booster pumps in parallel water supply of the high rise building, fire, boiler feed water and cooling water systems and a variety of irrigation fluid conveying.  
5. ZX/ZW/SP Self Priming Water Pump is our latest generation product base on US technology and craftwork. It is designed for economical & trouble-free operation in handling solid-laden liquids and slurries. 
7. LQRY Hot Oil Pump is suitable for heat-conduction oil, or other hot oils with temperature ≤370°C 
8. XBC Diesel Fire Water Pump comprise a combination of electric motor pump, diesel engine pump and jockey pump that used for fire fighting systems. Fire pumps are required to comply with Local Civil Defense Authority regulations and International Codes of Practice e.g. National Fire Protection Association (NFPA). 
   
There are also IS,OS,SH,D,DG,DM,ZX,ZW,HW,ZJ,ZG,QW,IH,QJ,2SK,2BV,Vacuum pumps, PLUNGER PUMPS,PISTON PUMPS,SCREW PUMPS,MUD PUMPS and so on.
  
Company Overview:
Weifang Sunny Power Machinery Co.,LTD.
is specialized in manufacture of multiple pumps and other relative power machinery, 
integrating the scientific research , development, design ,
manufacture, production, testing, and sales service for many years. 
Our company introduce the international advanced production equipment and technology , 
combines the strong technical experience and method , 
develop and research different sorts of pump products. 
Continuous innovate the products according to the customers needs,
the products have stable performance and quality.
there are many products are exported to some countries and regions, 
won the trust of customers all around the world .  
The main production of products: 
all kinds of centrifugal pump, 
mining industry clear water pump, 
boiler feed water pump, 
slurry pump, 
submersible pumps, 
sewage pumps, fire pumps, 
vacuum pumps,
water circulation pump, 
submersible pumps, 
automatic frequency conversion water supply equipment, 
sewage disposal equipment, 
widely used in metallurgy, coal, mining, power,chemical, 
pharmaceutical, city water supply and drainage industry,
plays huge role in the national economic construction. 
We sincerely hope :
we can cooperation with the domestic and international friends. 
We will try our best to provide the best quality ,
reasonable price and excellent service to every customers.
 
FAQ: 
1 / Q: Are you a manufactory or trading company ?
A: We are water pump manufactory with more than 30 years production experience. 
2 / Q: What's your MOQ?
A: Trial sample order is OK . 
3 / Q: What's your payment terms?
A: T/T , L/C , D/P, D/A ...... 
4 / Q: What certificates do you have ?
A: CE , ISO 9001 , UL ..... 
5 / Q: How about the warranty ?
A: One year warranty for pumps . 
6 / Q: What is the delivery time ?
A: 15-30 days according to customer quantities . 
7 / Q: Can you do OEM brand ?
A: Yes, Welcome . 
8 / Q: How to buy our pumps ?
A: Firstly we should know from you :
What is the fluid ? 
Clean water(temperature), dirty water(temperature), particles,or slurry ? 
What is the capacity and head ?
The capacity and head range ?
What is the voltage and frequency of three phase electrcity ?
Other conditions from customer if possible : pump type , motor ? 
With complete information, then we selected the pump and feedback to you. 
If you have special requirement, such material, please inform us . 
9 / Q: Quality reliable ?
A: We have cooperated with customers from European, Asia, Africa, 
Middle east, Australia, North and south America for more than 20 years, 
Quality if life and we observe international standards on each kind of pumps .
10 / Q: How to replace parts ?
A: In the order period, we will list our vulnerable parts and their quantities to 
our customer, and sold at competitive price, then ship together with pumps if 
customer needs. 
FOR MORE QUESTIONS, PLEASE CONTACT OUR SALES MANAGER.
 
 














 

Ultrasonic Extractor

Ultrasonic Extractor,Ultrasonic Thickness Gauge ,Ultrasonic Instrument ,Ultrasonic Flow Meter

Analysis Instruments Co., Ltd. , http://www.nbinstruments.com