Pump
>> Pump Body: Cast Iron with Special Anti-Rust Treatment
>> Impeller: Stainless Steel, Brass, or PPO
>> Mechanical Seal: Carbon, Ceramic, or Stainless Steel
Motor
>> Integrated Thermal Protector for Single Phase Motor
>> Motor with Copper Windings
>> Motor Housing: Steel Plate or Aluminum Alloy
>> C&U Bearing
>> AISI 304 Shaft or 45# Carbon Steel
Working Range
>> Liquid: Clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10°C to +100°C
>> Ambient temperature up to +40°C
>> Max. Working Pressure: 10 bar
>> Continuous Service: S1
>> Insulation: B
>> Protection: IP44
Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System
Advantages
>> Electronic pressure switch controlled by PC clip to avoid frequent pressure switch activation.
>> Every 72 hours, it will start for 10 seconds to prevent pump locking when not in use.
>> Water protection system to avoid long-term dry operation of the pump.
>> 3-second delay startup to avoid electrical sparks and ensure personal safety.
>> Flow priority system ensures full pressure with efficient acme design.
KJ-A SERIES INTELLIGENT WATER PUMPS — FOR COLD AND HOT WATER
1. Self-priming: For first-time use, fill the entire pump chamber with water.
2. Automatic: Powered on/off by an automatic system—turn on the tap, the pump works; turn off the tap, the pump stops working.
3. Booster: Stable and powerful pressure is controlled by a pressure sensor and flow sensor.
Additionally, the motor has a thermal protector that interrupts current when overheated.
                                   | Model | HP | W | Current (A) |
Capacitor (uf) |
H.Max (M) |
Q.Max (L/min) |
Pipe Size | Pressure Set (bar) |
Tank (L) |
| KJ-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
| KJ-250A | 0.35 | 250 | 1.8 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
| KJ-370A | 0.5 | 370 | 2.4 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
| KJ-550A | 0.75 | 550 | 3.5 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
| KJ-750A | 1 | 750 | 4 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
| KJ-1100A | 1.5 | 1100 | 4.8 | 25 | 62 | 66 | 1.5"X1.5" | 3.2 | 2 |
    Â
Production Work-flow Chart of Pump
Â
                                                  About us
    Fujian Gordon Pump Industry Co., Ltd is located in Fu’an City, known as the capital of small appliances. Gordon is our brand, which is gaining recognition in the industry. Our company has a strong technical management team and actively promotes automation in production. Our goal is to become a top-tier pump manufacturing enterprise.
FAQ
Q: Are you trading company or manufacturer ?
A: We are a factory.
Q: How long is your delivery time?
A: Typically 5-10 days if goods are in stock, or 15-20 days if not, depending on quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can offer samples for free but do not cover shipping costs.
Q: What is your terms of payment?
A: Payment <= $1000: 100% in advance. Payment >= $1000: 30% T/T in advance, balance before shipment.
Industrial kilns can be divided into two categories according to the thermal system: one is the intermittent kiln, also known as the periodic kiln, which is characterized by the intermittent production of the kiln, and the kiln temperature changes during each heating cycle. Such as chamber kilns, trolley kilns, pit kilns, etc.; the second type is continuous kilns, which are characterized by continuous production of kilns and temperature zones in the kiln chamber. During the heating process, the temperature of each section is constant, and the workpiece gradually enters the high temperature heating zone from the low temperature preheating zone, such as continuous heating furnace and heat treatment furnace, annular furnace, walking furnace, Vibrating hearth furnace, etc.
Support Brackets,Industrial Kiln Anchors,Metal Refractory Screw Anchor,Cold Resistance Screw Anchors
Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com