High Quality Water Ring Pump for Vacuum Evaporation

Model NO.: SK-30A
Displacement: 30m3/Min
Ultimate Pressure: 80hpa 60torr
Motor Power: 55kw
Rotating Speed: 740rpm
Water Supply: 100L/Min
Inlet&Outlet Dimensions: 100mm
Weight: 1200kg
Trademark: DVE
Transport Package: Neutral Package
Specification: CE MARK, PARTS OF HIGH LEVEL
Origin: Zhejiang, China
HS Code: 8414100090
Model NO.: SK-30A
Displacement: 30m3/Min
Ultimate Pressure: 80hpa 60torr
Motor Power: 55kw
Rotating Speed: 740rpm
Water Supply: 100L/Min
Inlet&Outlet Dimensions: 100mm
Weight: 1200kg
Trademark: DVE
Transport Package: Neutral Package
Specification: CE MARK, PARTS OF HIGH LEVEL
Origin: Zhejiang, China
HS Code: 8414100090

SPECIFICATION

Products Name: Water Ring Vacuum Pump


High Quality Water Ring Pump for Vacuum Evaporation
PS: The Picture is ONLY for reference, detailed model refer to REAL PIECE pls.


 

WORKING THEORY

1. Series SK,2SK Water Ring Vacuum Pumps can be used to exhaust ordinary gases as well as condensable gases(such as water vapor). Because they have the features of isothermal compression, they can exhaust flammable and explosive gases. When the pump made up of anti-corrosion material is selected, it can be used for exhausting corrosive gases too. 
 
   2SK series two-stage liquid ring vacuum pumps can work well like two sets of SK series water ring vacuum pump. Due to SK series vacuum pumps only reach the maximum vacuum of-700mmHg, to meet the high vacuum and the large pumping speed under high vacuum, China developed the 2SK series water ring vacuum pump in 80s in the 20th century. 
 
2. Series 2YK Liquid Ring Vacuum Pumps have the features of higher vacuum and better applicability. The different types of gases can be pumped with the selected suitable working media. Therefore, they can be applied in wider range.
 
3. The pumps run smoothly with low noise and consumption. The energy-saving is 30 percent comparing with the Water Jet and the Water VaporJet Pumps.
 
 
High Quality Water Ring Pump for Vacuum Evaporation

High Quality Water Ring Pump for Vacuum Evaporation
 
 

ADVANTAGE

1. Compared with SK water vacuum pump ,It gets high vacuum and pumping speed etc..
2. Simple structure and easy maintenance.
3. The mostly working medium is water and low maintenance costs.
4.The pump is widely use in many areas and suction water vapor,flammable, explosive and various gases contain a small amount of dust and liquid.
5. The pump can works in the harsh condition

 

PARAMETER

Model Displacement
(m3/min)
Ultimate Pressure Motor Power(kW) Rotary Speed(rpm) Water Supply(L/min)

Inlet&Outlet 

Dimensions
(mm)

Weight            

(kg)

hPa Torr
SK-0.5B 0.5 47 35 1.5 2900 8 1" 45
SK-0.8 0.8 47 35 2.2 2900 10 40 60
SK-1.5 1.5 47 35 4 2900 15 40 75
SK-3 3 80 60 5.5 1450 25 50 153
SK-6 6 80 60 11 1450 35 50 210
SK-9 9 80 60 18.5 980 55 80 400
SK-12 12 80 60 22 980 70 128 600
SK-12B 12 80 60 18.5 980 60 100 450
SK-20 20 80 60 45 980 70 100 800
SK-25 25 80 60 45 980 70 100 900
SK-30A 30 80 60 55 740 100 100 1200
SK-42 42 80 60 75 740 100 100 1500
 

APPLICATION

It can be applied to the vacuum drying, vacuum degassing, vacuum concentration, vacuum evaporation, vacuum impregnation process in chemical, pharmaceutical, metallurgy, food, medicine, textile, papermaking, electrical industry ( electronic industrial field) and so on. It can compose a vacuum system together with Roots Vacuum Pump and atmospheric Jet pump to achieve high vacuum, high efficiency, low power consumption.

 

Regular Selection for Water(Liquid)Ring Vacuum Pump


1,Based on the vacuum value
(1)If the pump is operated for long time with the inlet pressure range between1.3×104~1×105Pa (between 100 and 760 Torr), please choose series SK Water Ring Vacuum Pump.
(2)If the pump is operated for long time with the inlet pressure range between5×103~1.3×104Pa(between40 and 100 Torr), please choose series 2SK Water Ring Vacuum Pump.
(3)If the pump is operated for long time with the inlet pressure range between1×103~1.3×104Pa(between8 and 100 Torr), please choose series 2YK Liquid Ring Vacuum Pump.

2,Working Media 
There are four principles to choose working media(i.e.ring liquids);
(1) Lower saturated steam pressure
(2) Lower viscosity
(3) Stable physical & chemical features; no chemical reaction with the pumped gas;no corrosion to the pump; no pollution to the environment.
(4) Economy

      If the water is selected as the working medium, the best temperature of supply water should be lower than or equal to 15 °C; the highest one should not be higher than 40°C. While the transformer oil or other low viscosity and saturated vapor pressure industrial oils are as the working media, the general supply temperature should not higher than 40°C and the working media temperature inside the pump chamber should not be higher than 60C, when the liquid with lower boiling point is selected as the working media under some special circumstances, the cooling unit must be equipped to cool down the working media in order to ensure that the max temperature is 30ºC-50ºC, lower than the boiling point. For the closed circulated system of working media, the liquid storage unit and cooler must be equipped, and the gas-liquid separator must be installed at outlet. The mechanical seal should be used for dynamic seal of the shaft.
 


3,Choose the dynamic seal of the shaft:
Choose the packing seal in general occasion; choose the mechanical seal when the pump is used in no leak occasion.

4,Choose the material of the part that the gas passed:

(1) For the non anti-corrosion pump, the shaft is made of 45#steel or 40Cr, other parts are made of cast Iron or brass;
(2) For the anti-corrosion pump,the parts that the gas passed, should be made of stainless steel 304 and 306, or other material suitable for the respectively corrosive gas, or the parts should be put with anti-corrosion coating.


5, The motor should be selected based on pumping pressure.

If the pump is used for vacuuming while transferring gas, the pressure of pump outlet exceeds the standard atmosphere pressure.
When the outlet pressure exceeds 0.15MPa, the special double-stages liquid ring compressor should be chosen and not the vacuum pump refitted. Tthe power of the equipped motor should be increased obviously. And the special gas-liquid separator and auto-drain unit should be equipped too.
When the outlet pressure is below 0.15MPa, it can use the vacuum pump refitted as compressor. The power of the equipped motor should be increased properly.


6,Composition methods of the water ring vacuum pump system
The opening circulation system should be used if the working liquid in the outlet need not be circulated or partially circulated.
The closed circulation system should be used if the working liquid in the outlet must be circulated.

SPECIFICATION

Products Name: Water Ring Vacuum Pump


High Quality Water Ring Pump for Vacuum Evaporation
PS: The Picture is ONLY for reference, detailed model refer to REAL PIECE pls.


 

WORKING THEORY

1. Series SK,2SK Water Ring Vacuum Pumps can be used to exhaust ordinary gases as well as condensable gases(such as water vapor). Because they have the features of isothermal compression, they can exhaust flammable and explosive gases. When the pump made up of anti-corrosion material is selected, it can be used for exhausting corrosive gases too. 
 
   2SK series two-stage liquid ring vacuum pumps can work well like two sets of SK series water ring vacuum pump. Due to SK series vacuum pumps only reach the maximum vacuum of-700mmHg, to meet the high vacuum and the large pumping speed under high vacuum, China developed the 2SK series water ring vacuum pump in 80s in the 20th century. 
 
2. Series 2YK Liquid Ring Vacuum Pumps have the features of higher vacuum and better applicability. The different types of gases can be pumped with the selected suitable working media. Therefore, they can be applied in wider range.
 
3. The pumps run smoothly with low noise and consumption. The energy-saving is 30 percent comparing with the Water Jet and the Water VaporJet Pumps.
 
 
High Quality Water Ring Pump for Vacuum Evaporation

High Quality Water Ring Pump for Vacuum Evaporation
 
 

ADVANTAGE

1. Compared with SK water vacuum pump ,It gets high vacuum and pumping speed etc..
2. Simple structure and easy maintenance.
3. The mostly working medium is water and low maintenance costs.
4.The pump is widely use in many areas and suction water vapor,flammable, explosive and various gases contain a small amount of dust and liquid.
5. The pump can works in the harsh condition

 

PARAMETER

Model Displacement
(m3/min)
Ultimate Pressure Motor Power(kW) Rotary Speed(rpm) Water Supply(L/min)

Inlet&Outlet 

Dimensions
(mm)

Weight            

(kg)

hPa Torr
SK-0.5B 0.5 47 35 1.5 2900 8 1" 45
SK-0.8 0.8 47 35 2.2 2900 10 40 60
SK-1.5 1.5 47 35 4 2900 15 40 75
SK-3 3 80 60 5.5 1450 25 50 153
SK-6 6 80 60 11 1450 35 50 210
SK-9 9 80 60 18.5 980 55 80 400
SK-12 12 80 60 22 980 70 128 600
SK-12B 12 80 60 18.5 980 60 100 450
SK-20 20 80 60 45 980 70 100 800
SK-25 25 80 60 45 980 70 100 900
SK-30A 30 80 60 55 740 100 100 1200
SK-42 42 80 60 75 740 100 100 1500
 

APPLICATION

It can be applied to the vacuum drying, vacuum degassing, vacuum concentration, vacuum evaporation, vacuum impregnation process in chemical, pharmaceutical, metallurgy, food, medicine, textile, papermaking, electrical industry ( electronic industrial field) and so on. It can compose a vacuum system together with Roots Vacuum Pump and atmospheric Jet pump to achieve high vacuum, high efficiency, low power consumption.

 

Regular Selection for Water(Liquid)Ring Vacuum Pump


1,Based on the vacuum value
(1)If the pump is operated for long time with the inlet pressure range between1.3×104~1×105Pa (between 100 and 760 Torr), please choose series SK Water Ring Vacuum Pump.
(2)If the pump is operated for long time with the inlet pressure range between5×103~1.3×104Pa(between40 and 100 Torr), please choose series 2SK Water Ring Vacuum Pump.
(3)If the pump is operated for long time with the inlet pressure range between1×103~1.3×104Pa(between8 and 100 Torr), please choose series 2YK Liquid Ring Vacuum Pump.

2,Working Media 
There are four principles to choose working media(i.e.ring liquids);
(1) Lower saturated steam pressure
(2) Lower viscosity
(3) Stable physical & chemical features; no chemical reaction with the pumped gas;no corrosion to the pump; no pollution to the environment.
(4) Economy

      If the water is selected as the working medium, the best temperature of supply water should be lower than or equal to 15 °C; the highest one should not be higher than 40°C. While the transformer oil or other low viscosity and saturated vapor pressure industrial oils are as the working media, the general supply temperature should not higher than 40°C and the working media temperature inside the pump chamber should not be higher than 60C, when the liquid with lower boiling point is selected as the working media under some special circumstances, the cooling unit must be equipped to cool down the working media in order to ensure that the max temperature is 30ºC-50ºC, lower than the boiling point. For the closed circulated system of working media, the liquid storage unit and cooler must be equipped, and the gas-liquid separator must be installed at outlet. The mechanical seal should be used for dynamic seal of the shaft.
 


3,Choose the dynamic seal of the shaft:
Choose the packing seal in general occasion; choose the mechanical seal when the pump is used in no leak occasion.

4,Choose the material of the part that the gas passed:

(1) For the non anti-corrosion pump, the shaft is made of 45#steel or 40Cr, other parts are made of cast Iron or brass;
(2) For the anti-corrosion pump,the parts that the gas passed, should be made of stainless steel 304 and 306, or other material suitable for the respectively corrosive gas, or the parts should be put with anti-corrosion coating.


5, The motor should be selected based on pumping pressure.

If the pump is used for vacuuming while transferring gas, the pressure of pump outlet exceeds the standard atmosphere pressure.
When the outlet pressure exceeds 0.15MPa, the special double-stages liquid ring compressor should be chosen and not the vacuum pump refitted. Tthe power of the equipped motor should be increased obviously. And the special gas-liquid separator and auto-drain unit should be equipped too.
When the outlet pressure is below 0.15MPa, it can use the vacuum pump refitted as compressor. The power of the equipped motor should be increased properly.


6,Composition methods of the water ring vacuum pump system
The opening circulation system should be used if the working liquid in the outlet need not be circulated or partially circulated.
The closed circulation system should be used if the working liquid in the outlet must be circulated.

ER Spanner  
ER Hex Spanner 
ER Mini Spanner 
ER Spanner UM Type 
ER Hook Spanner

ER spanner
all models: S/ER 11-A, 16-A, 20-A                 
                     S/ER 8-M, 11-M, 16-M, 20-M, 25-M                  

                     S/ER 16-UM, 20-UM, 25-UM, 32-UM, 40-UM, 50-UM



SISHUI TELI TOOL CO., LTD.

SISHUI TELI TOOL MANUFACTURING CO., LTD locates in SISHUI Economic Developing Zone.Our products can be divided into 3 types: the first is various Tooling System for CNC MachineTools,including Precision Tool Holders, Spring Collets, Rough or Precision Boring Heads and Tapping Collets;The second is other standard machine tool accessories, such as all kinds of Live Centers , Drill Chucks,etc.;

The third is the special machine parts on CNC machine tools as clientss' samples or drawings.


ER Spanners

ER32 Um Spanner,ER Wrenches Spanner,ER Spanner ,ER32 UM M Type Wrenches

SISHUI TELI TOOL CO.,LTD. , http://www.er-collets.com

Posted on