UT312 vibrometer
First, the product overview
Features:
1. Simple structure and convenient operation. The integrated design installs the accelerometer and instrument in a single housing. When using it, simply align the meter probe with the object to be measured and press the measurement button to measure.
2. The meter is powered by a 9V laminated battery. It has a low voltage detection and indication function. When the battery voltage drops to affect the measurement accuracy value, the LCD display has a battery symbol to remind the user to replace the battery.
3, with automatic shutdown function, so that the battery has a longer life.
4. The meter has a latch function. When the measurement button is released, the data can be latched for easy use and reading.
5. The meter mainly reflects the vibration of the measured object from the energy point of view. It can measure the root mean square value of the vibration speed, the peak-to-peak value of the displacement and the half-peak value of the acceleration, thus satisfying various vibration measurement needs.
Second, the main technical indicators:
1. Measurement range: vibration displacement (PP): 0~1999μm
Vibration speed (RMS): 0 to 199.9 mm/s
Vibration acceleration (OP): 0 to 199.9 m/s2
2. Amplitude measurement error:
[1] Frequency response range and amplitude error:
Vibration displacement (PP): 10 ~ 500Hz, ≤ ± 5%
Vibration speed (RMS): 10 to 500 Hz, ≤ ± 5%
Vibration acceleration (OP): 10 to 1000 Hz, ≤ ± 10%
[2] Amplitude linear error:
Vibration displacement (PP): 0 ~ 20μm, ≤ ± 10% > 20μm, ≤ ± 5%
Vibration speed (RMS): 0 ~ 2.0mm / s, ≤ ± 10% > 2.0mm / s, ≤ ± 5%
Vibration acceleration (OP): 0 ~ 2.0m / s2, ≤ ± 10% > 2.0m / s2, ≤ ± 5%
3. Low voltage indication: The battery voltage is lower than 5.5V, indicating a low voltage prompt. At this time, the battery should be replaced.
4. Data retention time: When the measurement button is released, the measured data can be kept for one minute.
5. Indication fluctuation: The indication indicates that the fluctuation is not greater than one resolution.
6, the use of the environment: ambient temperature: 0 ~ 40 ° C relative humidity: ≤ 80%
Atmospheric pressure: 75～106Kpa
7, size: 185 (H) × 68 (W) × 30 (D) mm
8, weight: 230g (with battery)
UT312 vibrometer
Third, the working principle
The acceleration sensor signal is first filtered and amplified to obtain the acceleration signal, and then the first stage is integrated to obtain the speed signal. The signal is then integrated into the first step to obtain the displacement signal. The three signals are selected by the measurement selection switch to perform a cross-DC conversion. And A / D conversion, Zui sent three and a half LCD display.
SG-2 vibration sensor KR-939B fan safety operation monitor, KR-939B3 fan safety monitor, KR-939B4 fan safety monitor, KR-939B4-4 equipment safety monitor, KR-32 dual channel Equipment safety monitor, KR-34 four-channel equipment safety monitor, KR-939NCS type fan speed frequency meter
I. Overview
The V63 portable vibrometer is used for routine measurement of mechanical equipment, especially vibration measurements in rotating machinery and reciprocating machinery. Three parameters of vibration displacement, velocity (intensity) and acceleration can be measured. It is widely used in mechanical manufacturing, electric power, petroleum, chemical, metallurgical and other industrial sectors to conduct various inspections of various mechanical vibrations.
Its characteristics:
• The internal sensor forms a complete measurement system.
? 3 digits and a half digital LCD display.
? 9V laminated battery power supply, with low battery voltage indication function to ensure measurement accuracy.
? Small size, light weight, easy to carry around
Second, the main technical indicators
Range
? Displacement amplitude (peak-to-peak): 1~1999um
? Speed ​​(true RMS): 0.1~199.9mm/s
? Acceleration (peak): 0.1~199.9mm/s2
2. System linear error: <+5%
3. Frequency response: 10~1000HZ
4. Power: 9V laminated battery section
5. Use environment
? Ambient temperature: 0~45°C
? Relative humidity: ≤80%
6. Dimensions and weight:
? Dimensions: 176 X 68 X 31mm
? Weight: about 280g
The VB-Z80 vibrometer is a compact, hand-held vibrating meter consisting of a piezoelectric accelerometer and a digital display circuit. This instrument is suitable for measuring the vibration of various rotating machinery and can measure the acceleration, velocity or displacement value of vibration.
Measurement parameter
Acceleration, velocity or displacement measurement
Technical Parameters
Display: three and a half LCD display
Measuring range: acceleration 0.1~199.9m/ s2 p, 10~1000Hz, prms ×
Speed ​​0.1~199.9mm/srms, 10~500Hz, rms
Displacement 1~1999ump-p, 10~500Hz, pp rms × 2
Sampling period: 1S
Measurement accuracy: ± 5 %
Power: Battery (9 V)
Power switch: Press the measurement button to turn on the power. After the measurement button is released, the power is automatically cut off.
Working temperature: 0 ~ 50 ° C, humidity: ≤ 95% RH
Size: 1 8 5 ( H ) × 6 8 ( W ) × 3 0 ( D ) m m
Weight: 2 3 0 g (with battery)
First, the product overview
Features:
1. Simple structure and convenient operation. The integrated design installs the accelerometer and instrument in a single housing. When using it, simply align the meter probe with the object to be measured and press the measurement button to measure.
2, the instrument is powered by a 9V laminated battery, with low voltage detection and indication function. When the battery voltage drops to affect the measurement accuracy value, CZ63A portable air compressor balancing machine handheld vibration measuring instrument LCD display has a battery symbol, reminding the user Replacement battery.
3, with automatic shutdown function, so that the battery has a longer life.
4. The meter has a latch function. When the measurement button is released, the data can be latched for easy use and reading.
5. The meter mainly reflects the vibration of the measured object from the energy point of view. It can measure the root mean square value of the vibration speed, the peak-to-peak value of the displacement and the half-peak value of the acceleration, thus satisfying various vibration measurement needs.
ZH-B integrated vibration transmitter YZH-K series electronic vibration switch ZDT-2 portable vibration calibration table ZST-1 speed calibration table 8400 series static calibrator instrument ZY-350 dynamic calibrator instrument
DWQZ series eddy current sensor SZ-4 type magnetoelectric speed sensor SZ-6 (C) type magnetoelectric speed sensor SZ-6B type magnetoelectric speed sensor SZ-6i type explosion-proof magnetic type speed sensor ZHS-9/ZHV -9 integrated ultra low frequency vibration displacement sensor SMCB-01/02 magnetic sensitive speed sensor SZCB series magnetoresistive speed sensor TD series LVDT sensor UT-81 series LVDT sensor B49 (UHZ) series magnetic flip column liquid level sensor SZCB-01i Type explosion-proof magnetic resistance type speed sensor SZ-6i type explosion-proof magnetic electric speed sensor TD-1i type LVDT sensor
First, the product overview
Features:
1. Simple structure and convenient operation. The integrated design installs the accelerometer and instrument in a single housing. When using it, simply align the meter probe with the object to be measured and press the measurement button to measure.
2. The meter is powered by a 9V laminated battery. It has a low voltage detection and indication function. When the battery voltage drops to affect the measurement accuracy value, the LCD display has a battery symbol to remind the user to replace the battery.
3, with automatic shutdown function, so that the battery has a longer life.
4. The meter has a latch function. When the measurement button is released, the data can be latched for easy use and reading.
5. The meter mainly reflects the vibration of the measured object from the energy point of view. It can measure the root mean square value of the vibration speed, the peak-to-peak value of the displacement and the half-peak value of the acceleration, thus satisfying various vibration measurement needs.
Second, the main technical indicators:
1. Measurement range: vibration displacement (PP): 0~1999μm
Vibration speed (RMS): 0 to 199.9 mm/s
Vibration acceleration (OP): 0 to 199.9 m/s2
2. Amplitude measurement error:
[1] Frequency response range and amplitude error:
Vibration displacement (PP): 10 ~ 500Hz, ≤ ± 5%
Vibration speed (RMS): 10 to 500 Hz, ≤ ± 5%
Vibration acceleration (OP): 10 to 1000 Hz, ≤ ± 10%
[2] Amplitude linear error:
Vibration displacement (PP): 0 ~ 20μm, ≤ ± 10% > 20μm, ≤ ± 5%
Vibration speed (RMS): 0 ~ 2.0mm / s, ≤ ± 10% > 2.0mm / s, ≤ ± 5%
Vibration acceleration (OP): 0 ~ 2.0m / s2, ≤ ± 10% > 2.0m / s2, ≤ ± 5%
3. Low voltage indication: The battery voltage is lower than 5.5V, indicating a low voltage prompt. At this time, the battery should be replaced.
4. Data retention time: When the measurement button is released, the measured data can be kept for one minute.
5. Indication fluctuation: The indication indicates that the fluctuation is not greater than one resolution.
6, the use of the environment: ambient temperature: 0 ~ 40 ° C relative humidity: ≤ 80%
Atmospheric pressure: 75～106Kpa
7, size: 185 (H) × 68 (W) × 30 (D) mm
8, weight: 230g (with battery)
UT312 vibrometer
Third, the working principle
The acceleration sensor signal is first filtered and amplified to obtain the acceleration signal, and then the first stage is integrated to obtain the speed signal. The signal is then integrated into the first step to obtain the displacement signal. The three signals are selected by the measurement selection switch to perform a cross-DC conversion. And A / D conversion, Zui sent three and a half LCD display.
SG-2 vibration sensor KR-939B fan safety operation monitor, KR-939B3 fan safety monitor, KR-939B4 fan safety monitor, KR-939B4-4 equipment safety monitor, KR-32 dual channel Equipment safety monitor, KR-34 four-channel equipment safety monitor, KR-939NCS type fan speed frequency meter
I. Overview
The V63 portable vibrometer is used for routine measurement of mechanical equipment, especially vibration measurements in rotating machinery and reciprocating machinery. Three parameters of vibration displacement, velocity (intensity) and acceleration can be measured. It is widely used in mechanical manufacturing, electric power, petroleum, chemical, metallurgical and other industrial sectors to conduct various inspections of various mechanical vibrations.
Its characteristics:
• The internal sensor forms a complete measurement system.
? 3 digits and a half digital LCD display.
? 9V laminated battery power supply, with low battery voltage indication function to ensure measurement accuracy.
? Small size, light weight, easy to carry around
Second, the main technical indicators
Range
? Displacement amplitude (peak-to-peak): 1~1999um
? Speed ​​(true RMS): 0.1~199.9mm/s
? Acceleration (peak): 0.1~199.9mm/s2
2. System linear error: <+5%
3. Frequency response: 10~1000HZ
4. Power: 9V laminated battery section
5. Use environment
? Ambient temperature: 0~45°C
? Relative humidity: ≤80%
6. Dimensions and weight:
? Dimensions: 176 X 68 X 31mm
? Weight: about 280g
The VB-Z80 vibrometer is a compact, hand-held vibrating meter consisting of a piezoelectric accelerometer and a digital display circuit. This instrument is suitable for measuring the vibration of various rotating machinery and can measure the acceleration, velocity or displacement value of vibration.
Measurement parameter
Acceleration, velocity or displacement measurement
Technical Parameters
Display: three and a half LCD display
Measuring range: acceleration 0.1~199.9m/ s2 p, 10~1000Hz, prms ×
Speed ​​0.1~199.9mm/srms, 10~500Hz, rms
Displacement 1~1999ump-p, 10~500Hz, pp rms × 2
Sampling period: 1S
Measurement accuracy: ± 5 %
Power: Battery (9 V)
Power switch: Press the measurement button to turn on the power. After the measurement button is released, the power is automatically cut off.
Working temperature: 0 ~ 50 ° C, humidity: ≤ 95% RH
Size: 1 8 5 ( H ) × 6 8 ( W ) × 3 0 ( D ) m m
Weight: 2 3 0 g (with battery)
First, the product overview
Features:
1. Simple structure and convenient operation. The integrated design installs the accelerometer and instrument in a single housing. When using it, simply align the meter probe with the object to be measured and press the measurement button to measure.
2, the instrument is powered by a 9V laminated battery, with low voltage detection and indication function. When the battery voltage drops to affect the measurement accuracy value, CZ63A portable air compressor balancing machine handheld vibration measuring instrument LCD display has a battery symbol, reminding the user Replacement battery.
3, with automatic shutdown function, so that the battery has a longer life.
4. The meter has a latch function. When the measurement button is released, the data can be latched for easy use and reading.
5. The meter mainly reflects the vibration of the measured object from the energy point of view. It can measure the root mean square value of the vibration speed, the peak-to-peak value of the displacement and the half-peak value of the acceleration, thus satisfying various vibration measurement needs.
ZH-B integrated vibration transmitter YZH-K series electronic vibration switch ZDT-2 portable vibration calibration table ZST-1 speed calibration table 8400 series static calibrator instrument ZY-350 dynamic calibrator instrument
DWQZ series eddy current sensor SZ-4 type magnetoelectric speed sensor SZ-6 (C) type magnetoelectric speed sensor SZ-6B type magnetoelectric speed sensor SZ-6i type explosion-proof magnetic type speed sensor ZHS-9/ZHV -9 integrated ultra low frequency vibration displacement sensor SMCB-01/02 magnetic sensitive speed sensor SZCB series magnetoresistive speed sensor TD series LVDT sensor UT-81 series LVDT sensor B49 (UHZ) series magnetic flip column liquid level sensor SZCB-01i Type explosion-proof magnetic resistance type speed sensor SZ-6i type explosion-proof magnetic electric speed sensor TD-1i type LVDT sensor
OEM Stainless Steel Precision Cnc Machining Part
Turning products by CNC equipment
1.Materials: in both ferrous and non-ferrous alloys(carbon steel, stainless steel, aluminum alloy,
brass and bronze alloy)
2.All kinds of surface treatments are available: polishing, zinc plating, nickel plating, chrome plating,
powder coating, phosphate coating
3.Very high production rate assure low production cost
4.Advanced production equipment
5.Advanced test(inspection) measure.
Stainless Steel Machining Parts
Stainless Steel Machining Parts,High Precision Machining Parts,Cnc Aluminum Parts,Machined Metal Parts
Hebei Mingda International Trading Co.,Ltd , https://www.amazingcastings.com