What is the surveillance camera corridor mode?

When we usually take pictures, we sometimes find that we can't completely put the characters into the picture. At this moment, the witty little friends will take the phone side and shoot it.

The same thing that bothers you is that when the surveillance camera is installed in the corridor, according to the scene of the alley, it is found that the entire environment cannot be fully illuminated. At this moment, the corridor mode works.

What is the corridor mode?

The corridor mode is to bring the camera side, so that more image information is obtained in the depth direction, and the output ratio is changed from 16:9 to 9:16.

Configuration method

Note the following points when using the corridor mode

1. At present, all the network cameras of Haikang New Series support the corridor mode, but we call it rotation in the menu.

2, configuration address: IE access IPC's IP address, in the configuration - image - video adjustment - rotation - open.

3. Because the corridor mode is just a simple rotating image, the device should be mounted sideways, and the camera should be rotated 90 degrees clockwise to compensate. The image seen at this time is positive, otherwise the person in the picture is horizontal.

4. Since the output ratio becomes 9:16, devices such as decoding output are also required to support corridor mode output.

Example:

The following figure takes the 4200 client as an example. The screen segmentation method also supports several segmentation of the corridor mode, such as three-screen segmentation.

Note: Before applying the corridor mode, we must confirm whether the corresponding decoder, platform, NVR and other devices support the segmentation display of the corridor mode class. Remember, remember.