XH-S1-A02-B01-C01, XHS2G-A01-B02, XHS2G intelligent speed monitoring and protection device I. Overview
HZD-8500/C/D turbine monitoring and protection device, HZD-RSDC type overspeed protection device, 8500B rotating machinery monitoring and protection system, HZW type axial displacement monitor, HZW-Z type intelligent differential expansion monitor, HZS-04N type intelligent Tachometer DYZ-Z vibration intensity monitor
HZS-04F intelligent anti-tachometer, XMD-106-40/20 intelligent vibration/temperature monitor HZS-04T wall-mounted intelligent tachometer, HZS-04 intelligent tachometer, HZS-04M electronic module tachometer, HZS-04C type intelligent tachometer, HZD-Z/W type wall-mounted intelligent vibration temperature monitor HZD-W/L type intelligent vibration monitor, HZD-W/L type four-channel vibration monitor, HZD-Z type intelligent Shaft vibration monitor, HZD-W intelligent vibration monitor, HZD-L intelligent vibration intensity monitor, HXW-U intelligent fuel tank oil level monitor, HXW-Y intelligent oil motor monitor, HXW-R intelligent Thermal expansion monitor
8500LD dual channel intensity monitor, 8500ZD dual channel vibration monitor SW-2 displacement monitor, RDPX eccentric monitor, 85200-W displacement monitor
MLI3000 vibration monitor, MLI-2001 speed detector, MLI-2010 water swing monitor, MLI-2009 eccentric monitor, MLI-2007 speed monitor, MLI-2005 differential monitor, MLI-2004 bearing vibration intensity Monitor
MLI-2003 bearing vibration monitor, MLI-2002 shaft displacement monitor
MTN/1185IC/VP-201/202 wattage vibration velocity sensor BY vibration measuring device TM016-001-530-00-0/TM016 seismic velocity acceleration vibration sensor transmitter H intelligent vibration/temperature monitor XMD-106-40 /20
XH-S1-A02-B01-C01, XHS2G-A01-B02, XHS2G intelligent speed monitoring and protection instrument physical indicators:
Overall size:
Panel table: 160 (width) × 80 (height) × 160 (deep) mm
Opening size: 152 (width) × 74 (height) mm
Wall table: width 190 × height 290 × thickness 92 (mm);
Installation size: bottom 170 × height 272 (mm)
Environmental indicators:
Temperature: -10 ° C to +80 ° C, relative humidity ≤ 90%
Ordering guide:
Panel table: JM-B-3E-AXX-BXX
27/MT1/MT2T/MT3T/MT3M vibration tile sensor
CS-CD-001/CS-CD-010/OD9200/OD9300/S6000/PR9266/PR9268/20/30/60/70/Axis vibration vibration sensor
MLV-9200 (16699/900)/9200/74712/47633/HT-2ZD-24/ZD25/ZDF bearing vibration speed sensor
VB-Z9500/VB-Z9600/SJ1061/SJ1062 magnetoelectric vibration speed tile sensor
DTM10-301 radial vibration monitoring instrument DTM10-302 axial displacement monitoring instrument DTM10-501 speed / key phase monitoring instrument
DTM10-502 speed / key phase monitoring instrument DTM20 intelligent digital chassis vibration monitoring instrument DTM20-101 chassis vibration monitoring instrument
TM900 Power ConverterTM101 Acceleration, Speed, Displacement Vibration Protection Meter TM201/TR4101 Shaft Vibration Transmitter Protection Meter
TM202/TR4102 shaft position expansion differential transmission protection instrument TM301 shaft vibration transmission protection instrument TM302 shaft position transmission protection instrument
CZJ-B2/CZJ-B3/CZJ-B3G/CZJ-B4/CZJ-B4G/CZ-6/CJZ-D/CJZ-D2/MLI-2001/WB-9902/WB-8112B/ZJ2/ZJ2-A double Channel wall-mounted roof vibration measuring instrument bearing bush vibration monitoring and protection instrument
8500LD/85100XY/85564/85200/85850BCD-21A/VIBROCONTROL110/EN900/EN2000A1/Double-channel tile vibration monitor instrument XMD-106-40/20 intelligent vibration/temperature monitor
8000/B/C/E series combined monitoring and protection device, RDZW series axial displacement monitor, RDCZ series differential expansion monitor, RDXZ series shaft vibration monitor, CZJ-B series vibration monitor, CZJ-4D type four channel Vibration monitor
SZC-04 series intelligent tachometer, SZC-04F series intelligent speed anti-rotometer, DZC-02A tachometer
Vibration monitor
TM0302/TM0306 all weather protection box TM0312/TM0314 explosion-proof enclosure TM0393 eddy current probe housing
TM0510-K Portable Vibration Calibration Table TM0520-K Portable Adjustable Frequency Vibration Calibration Table TM0540 Portable Eddy Current Sensor Static Calibration Instrument PT908 Portable Vibration and Bearing Measuring Instrument
HZD-L/W, HZD-L/W-A02-B02-C02-D02 intelligent vibration monitoring and protection device
The main function:
Monitoring and protection of bearing bush vibrations of rotating machinery such as steam turbines, coal mills, fans, reducers, pumps, centrifuges, balancing machines, and air compressors.
Function Description:
The measured value and alarm set value can be displayed on the LED digital tube.
When the alarm setting value is exceeded, the alarm indicator lights up, and the switch signal is output on the rear panel to protect the monitored equipment. The alarm setting delay adjustment is in the range of 1-60 seconds to prevent false alarms caused by on-site interference. .
It has a current output interface that can be connected to devices such as computers, DCS, PLC systems, and paperless recorders.
It has upper and lower power detection function, sensor drop detection function, and cut off alarm and stop output circuit at the same time, effectively suppressing instrument false alarm.
The vibration intensity (vibration intensity) and the vibration amplitude (vibration displacement) are freely switched.
Electrical indicators:
Sensor input: magnetoelectric speed sensor or vibration acceleration sensor Measuring range: 0～500μm pk-pk
0 to 50.0 mm/s rms
Measurement accuracy: linear error ≤ ± 1% (full scale value)
Display mode: Digital tube display frequency response: 1.0-300Hz
Current output: 4~20mA; drive 500Ω load alarm contact capacity: AC220V/3A, DC28V/3A
Working power: 220VAC±10% 50Hz Power consumption ≤10W
CNC Hydraulic Flat Bar Punching, Marking & Shearing Machine
CNC Hydraulic Punching Machine for Plates
POWER: Three phase four wire systems
AC Voltage: 380 V /415 V
Fluctuation of voltage: ±5%
Frequency: 50Hz
Local working temperature: 0-40℃
Used for punch and mark of joint plate in the field of iron tower. It is also used to punch and mark metal plate of other trade.
Unloading Conveyors
The Feeding Conveyors (Double linear guide with rack gear in middle, high precision)
Y Axis Main Machine Wove Back And Forth By Double Linear Guides
Double leaner guides feeding and NC feeding carriage
Automatic Feeding Carriage
Work Pieces
Product Feature:
1. The machine-frame is made by C-type plate
welding, with good rigidity and big handling space. The machine sets three
die-stations (among them, one is the marking die-station), automatic switching
die-stations. Clamping system can adapt to different work piece, with zero
baffles as datum mark, and work piece supported by rolling-ball working table.
Axis X & Y action should be controlled by servo motor and ball-screw
driving, and double-axis CNC system controls the position of punching, so as to
make the whole machining process automatically; operator may input the sizes of
work piece to computer for repeated calling program in the future.
2. Adopt CNC technology, servo motor
in feeding, with high efficiency, stable work piece precision.
3. Important functional components
adopt modular assembly, easy to repair it.
4. Carry out punching, marking and
drilling on the one plate.
5. Drilling unit has the functions
including rapid falling, slow work-feeding and quick feeding back to improve
working efficiency.
6. Easy programming, may input the
diameter of holes, position and the quantity of work piece to computer, and
also may use the program generated by lofting software, or adopt direct
conversion CAD/CAM.
7. With function of self-diagnosis for
failures.
8. Lighten the working strength of
workers.
Our Service
Installation:
The seller shall send one engineer to the buyer's country for installation, commissioning and training. The buyer is responsible to provide all necessary equipments for handling and lifting the machine parts before seller's engineers go to the buyer's plant. In addition, the buyer should provide workers to support in installation activities, under supervision from the seller's engineers.Commission:
The Supplier should give drawings and other details of material/preparation required for installation of machinery which the buyer has to prepare and keep ready before the machine arrives at the buyer's factory. Installation and commissioning can be finished within 5-10 days for above machine generally.Training:
Training will include training on computer programming, machine operation and troubleshooting. The training time is at most 5 days for this machine.The buyer should arrange no less than two people for accepting training. After training, the buyer should sign the "Receiving & Inspection Report" supplied by the seller to demonstrate the successful finish of commissioning and acceptance of the buyer.
Our Company
Factory:
With the development of SUNRISE, now our company has occupied important position in this industry. Due to the orders and sales performance is continuously improving, in order to better development, to meet customer's demand, and to provide customers high-quality equipment with the shortest time, our company have bought the new site, the area about 50,000 square meters, this will make sufficient preparation for development of our company and every customer.Workshop:
Quality make brand, honesty win market, harmony converge talents, and innovation promote development. Our ability to consistently provide innovative, high quality products that outlast and outperform the competition, is why we are the one of the most successful companies offering the most advanced and productive solutions in the CNC machine industry.Warehouse:
Manufacturing customer oriented products has always been our supreme concern. We believe that quality is the soul of an enterprise forever. Therefore, we never compromised with the quality of our products. We adopt advanced, scientific modern management ideas and system to realize supervisory control among all aspects of produce, inspection, sale and service etc., which help control quality, increase work efficiency and guarantee products' stability, reliability and precision. Therefore, the enterprise can achieve rapid and sustainable development.Team:
We are a team of experienced and dynamic professionals who are experts in handling precision work through scientific processes. The professional excellent talents unite a powerful and creative team of design, research and development, which build our solid technical strength and competitiveness. And our company is developing fast and supply specialized service to all customers.
Our Certifications
SUNRISE is focus on quality and company's image. We win market with good quality and service. The company has already passed International Quality Management System ISO9001:2008 certification for many years and also got the CE certificate, smoothly got the title of High and New Tech Enterprises. And has more than ten own intellectual property rights and patent technology. We have own import and export right. Our products exported to Russia, South Asia, South east Asia, Middle East, South America, Africa, Australia, Eastern Europe etc.
Flat Bar Punching Machine,Flat Plate Punching Machine,Flat Bar Shearing Machine, Flat Bar Hydraulic Press Machine
Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com