There are numerous advantages to applying solar films on the glass surfaces of buildings. These films help retain coolness during summer and warmth during winter while shielding the glass, reducing overheating inside the rooms. The immediate benefits include energy savings and consequently lower utility bills. Additionally, solar control films offer excellent UV protection, safeguarding both your skin and your furnishings like sofas, floors, and carpets. All this can be achieved without major renovations, exorbitant costs, or replacing windows. Simply select the appropriate solar film for your glass surfaces and apply it correctly.
To begin with, gather everything you’ll need for the application. Besides having an adequate roll of solar film, ensure you have the following tools: a soft, clean cloth for cleaning, a scraper for cleaning, a hard rubber spatula, a spray bottle, a metal ruler, a metal square, a cutter with steel blade, a spatula, and paper towels.
Before starting, make sure the conditions are ideal. The glass surface must be smooth and in good condition, thoroughly cleaned. The temperature should not fall below 10 degrees Celsius, and it’s best to avoid windy days to prevent dust from getting trapped between the glass and the film.
Prior to applying the solar control film, ensure the glass is spotless. Use a detergent that doesn’t leave residues such as lanolin or wax. Avoid cloths that shed fibers. After thorough cleaning, use a scraper to ensure no dirt remains, paying special attention to corners and edges near window frames. Once the glass is pristine, proceed with the application.
Here’s how to apply solar films step-by-step:
1. Lightly and evenly wet the previously cleaned glass using a spray bottle.
2. Lay out the film with the liner facing you. Thanks to the water on the glass, the film will adhere easily.
3. Remove the protective liner.
4. Spray the exposed adhesive surface generously to activate it. After about two minutes, the adhesive will be fully ready.
5. Flip the film and position it adhesive-side down onto the glass, spraying again for extra moisture.
6. Adjust the film's placement, which will slide smoothly due to the water beneath it.
7. Start spatulating to spread the film evenly, adding a bit of soapy water to ease the process.
8. Trim the excess film using a ruler, square, and cutter, ensuring a 2 mm gap from the window frame.
9. Spatulate again with more pressure to perfect the application.
10. Use the spatula and paper towel to ensure the edges adhere completely.
Your solar film application is complete. Follow these steps to protect every glass surface in your building.
After installation, the adhesive on the film will take about 15 days to dry fully. It’s recommended to wait at least two weeks before cleaning the windows to avoid damaging the newly applied film.
Can Beer ,beverage Filling Machine
King Whale Machinery Group J.S , https://www.baitextile.com