Domestic Electric Copper Wire Self-Priming Auto Pump with Power Cable

Self-priming Electric Pump with Micro CP for shower

Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechanical Seal: carbon / ceramic / Stainless Steel

Motor
>> Built-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continuous service S1
>> Insulation: B
>> Protection: IP44

Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System

Advantages
>> Electronic pressure switch controlled by PC clip to avoid frequent pressure switch operation.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump being in anhydrous state for a long time.
>> Delay 3s start to avoid spark-over socket, protect personal safety.
>> The flow priority system, electric pump use acme, truly achieve full pressure.

KJ-A SERIES INTELLIGENT WATER PUMPS ------FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water.
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stops working.
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor.
Besides, thermal protector in motor will interrupt current when motor overheats.

                                                                   

                                                  About us
     Fujian Gordon Pump Industry Co., Ltd is located in Fu'an City, where is the capital of small appliances. Gordon is our own brand, which tends to go up in the peer. Our company has a strong technical management team. We Actively promote the automatic process. Our goal is to do a first-class pump manufacturing enterprises.




FAQ

Castable Anchor

An anchoring agent abrasive mixing device, comprising a mixing barrel, a stirring mechanism is arranged in the mixing barrel, a screw rod is installed in the mixing barrel against the wall, and a driving motor for driving the rotation of the screw rod is arranged on the mixing barrel, so that the The screw comprises a first threaded part on the upper part and a second threaded part on the lower part, the thread directions of the first threaded part and the second threaded part are opposite, and the first threaded part and the second threaded part are symmetrically sleeved with The nut sleeve is provided with an annular scraper adapted to the inner wall of the mixing barrel, and the rotation of the screw makes the nut sleeves located on the first threaded part and the second threaded part move toward each other or relatively deviate from each other. The movement will drive the annular scraper to scrape off the material on the inner wall of the mixing barrel, so as to prevent the material from accumulating on the inner wall of the mixing barrel for a long time, and ensure the cleaning of the mixing barrel.

Castable Anchor,Abrasive Anchors,Anchors For Castable,Thread Stud Anchors

Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com