Farm Tire 15.0/55-17 for Tmr Mixer Trailer

Model NO.: 15.0/55-17
Brand: Multistar
Main Market: Europe
Trademark: Multistar
Specification: 15.0/55-17
Origin: China
HS Code: 401161

specifications:

1.Type: baler and forage harvester tyre 15.0/55-17 500/50-17 19.0/45-17

2.Ply: 14  18

3.O.D/S.W for 500/50-17 935X500mm

4.Fitted wheel rim 16.00x17  06/205/161  08/275/221  ET:0/-35/-92

5.Certification: REACH  DOT for tires and rim comply with TRA  ETRTO  JATMA

6.1 year for tire and 2-3 years for rims

Main performance:

Low section agricultural flotation implement tires

Low level of soil compaction during harvesting means significantly lower energy input for soil reclamation

High load capacity with low inflation pressures

Suitable for both on and off the road applications

Idealy tyres for modern farming especailly for baler,forage harvester etc.

Tyre size Pattern TT/TL PR / LI RIM O.D / S.W LOAD PRESSURE Speed
14.0/65-16 IMP-05 TL 10 11.00X16 870x353mm 2.240kg 3.7bar 40km/h 
14.0/65-16 IMP-05 TL 14 11.00X16 870x353mm 2.900kg  5.5bar 40km/h 
15.0/55-17 IMP-05 TL 14 13.00x17 850x391mm 2.575kg 4.9bar 40km/h 
15.0/55-17 IMP-05 TL 18 13.00x17 850x391mm 3.250kg 6.5bar 40km/h 
19.0/45-17 IMP-05 TL 14 16.00x17 865x453mm 2.800kg 3.9bar 40km/h 
19.0/45-17 IMP-05 TL 18 16.00x17 865x453mm 4.000kg 4.5bar 40km/h 
500/50-17 IMP-05 TL 14 16.00x17 935x500mm 3.550kg 3.6bar  40km/h 
500/50-17 IMP-05 TL 18 16.00x17 935x500mm 4.125kg 4.4bar 40km/h 


 

PP/PE Filler Masterbatch Extruder Advantage A: extremely low thermal deformation, high accuracy, large torque, wear resistance under high temperature and pressure, and good corrosion resistance;

PP/Pe Filler Masterbatch Extruder Advantage B: Both the barrel and the screw are provided with a cooling device, which is directly connected to the cooling system. In the cooling system, the barrel and each area of the machine are respectively connected with solenoid valves. When the measured temperature exceeds the set value, the solenoid valve is quickly connected and stopped. Water supply, at the same time can be connected to the corresponding heating circuit, so that the temperature rises to the set value. This work is performed alternately, and the working temperature of each section is controlled within a small range (1 to 3 ° C). The temperature control is accurate and the reaction is fast. It can quickly reduce the working temperature in the case of local overheating, and effectively prevent the color difference of the finished particles. 

PP/PE Filler Masterbatch Extruder

Pp Extrusion,Pe Extruder,Pe Filler Masterbatch Extruder,Pp Filler Masterbatch Extruder

Nanjing Juli Chemical Machinery Co., Ltd. , https://www.jlextruder.com

Posted on