Five Cognitive Misunderstandings of Intelligent Artificial Climate Incubator
The seed germination rate is one of the important indicators to determine the quality of seed. Germination requires sufficient water, suitable temperature and light. In order to meet the appropriate conditions for seed germination and to obtain correct and reliable germination test results, it is necessary to have advanced and basic germination test equipment - intelligent artificial climate incubators. Here's a look at the cognitive adjustments when using an intelligent artificial climate incubator:
First, although it is possible to arbitrarily set the operating time, temperature, humidity, and illumination values ​​for each test section. However, the temperature difference of each layer in the box is still there, the temperature inside and outside the same layer is also different, and the temperature difference between the inside and outside of the upper and lower surfaces of the incubator above the larger volume is greater, so I hope to pay special attention to this when using it. problem.
Second, from the measurement results, the temperature of the top layer of the intelligent artificial climate incubator is not the highest, and the temperature in the middle of the cabinet is the highest.
Third, the actual temperature in the intelligent artificial climate incubator is still somewhat different from the temperature of the tank. The general situation in the body is higher than the temperature set outside the tank, mainly because of the plant's respiration and photosynthesis.
Fourth, when using an intelligent artificial climate incubator, it is necessary to base the measurement on the number of germinating seeds correspondingly, not necessarily the bigger the better.
Fifth, when the number of samples is more than one grade, there are many times when the sample is to be controlled, the germination temperature should be high at the high temperature, and the low temperature should be at the low position so that all the samples can be synchronized.
Nickel Alloy Powder
Nickel-based Laser Cladding Powder is a type of powder material used in laser cladding processes. Laser cladding is a technique that involves using a high-energy laser beam to melt and fuse a powdered material onto a substrate, creating a protective or functional coating.
Nickel-based laser cladding powders typically consist of nickel as the main component, along with other alloying elements such as chromium, molybdenum, and tungsten. These alloying elements help to improve the mechanical properties, corrosion resistance, and wear resistance of the resulting coating.
Nickel-based laser cladding powders are commonly used in various industries, including aerospace, automotive, and oil and gas. They are often chosen for their excellent corrosion resistance, high-temperature strength, and ability to withstand harsh environments.
The laser cladding process using nickel-based powders can be used to repair damaged or worn-out parts, enhance the surface properties of components, or create new parts with specific properties. The laser beam melts the powder material, which is then rapidly solidified to form a dense and metallurgically bonded coating.
Overall, nickel-based laser cladding powders offer a versatile and effective solution for improving the performance and lifespan of components in various industries.
Ni Based Powder,Inconel 718 Powder,Nickel Base Powder,Inconel 625 Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.lyshieldcutters.com