marine waste oil incinerator
waste burner
marine waste oil incinerator  Â
Overview
The incinerator is equipped with two doors, which are intended for ash removing, the incinerator in stand-by mode (Com.Tem. less than 220ºC), the doors can be opened properly. If the incinerator is running in cooling down mode, the door can be opened till Com.Tem. less than 100ºC and incinerator fully stop. Meanwhile, there is a feeding device available for solid waste feeding continuously during system in operation.
Â
The electrical control panel is installed on the incinerator and it contains fuses, starters, PLC and operator panel. The electric panel is built according to international standards for marine equipment. The operator panel which is located at the right side of the control panel has a touch screen and defined keys for system starting /stopping and selecting burner modes.
Â
The burning process is controlled by the PLC and monitored by the HMI(Human Machine Interface) and scanned by a photo resistor. The combustion chamber temperatures are also regulated automatically by the PLC control system.
Â
Usage
The marine Incinerator which is designed for on board incineration of
ship's waste oil and solid,
Â
Main parts:
Incinerator
Burner
Combustion chamber with diesel oil burner, sludge burner, and electric control panel
Flue gas fan
Flue gas damper
Sludge tank with circulating pump and heater
Sludge circulation pump
Sludge dosing pump
Electrical control panel
Expansion Bellow
Feeding Set
Â
Three different heat forms,
you can choose any of them
Electric Heater
Steam Heating
Thermal oil heating
Main parameterÂ
| Â Â Â Model | Â HYINC-18 | Â HYINC-50 | HYINC-80 |
| Â Â Capacity | Â 22.5KG/H | 63KG/H | 100KG/H |
| 180,000KCAL/H Â (208KW) |
500,000KCAL/HÂ Â (580KW) |
 800,000KCAL/H  (929kW) |
|
| Electrical power Consumption |
  7 kw |   12kW |    15kw |
| Total weight |   1500kg |  2900 kg |   5000 kg  |
ApprovalÂ
RS , USCG , CCS ,NK,etc
Â
Batch Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flow-chat of Batch Waste Plastic Pyrolysis Plant
Advantages of Batch Waste Plastic Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Plastic Pyrolysis Plant
|
NO. |
ITEM |
PROJECT |
|
|
1 |
Equipment Model |
XY-7 |
XY-8 |
|
2 |
Door Model |
Full Open Door |
Full Open Door |
|
3 |
Suitable Raw Materials |
Rubber/Plastic Products |
Rubber/Plastic Products |
|
4 |
Structure |
Horizontal Type Revolves |
Horizontal Type Revolves |
|
5 |
Reactor Size |
Φ2200*6000mm Φ2600*6600mm |
Φ2200*6000mm Φ2600*6600mm |
|
6 |
Capacity for One Batch |
5-6Mt; 8-10Mt |
5-6Mt; 8-10Mt |
|
7 |
Oil Yield of Tires |
40%-45% |
40%-45% |
|
8 |
Work Pressure |
Normal Pressure |
Normal Pressure |
|
9 |
Reactor Rotation Speed |
0.4R/M |
0.4R/M |
|
10 |
Fuels Choice |
Coal, Wood |
Coal, Wood, Gas, Oil |
|
11 |
Power |
18KW/H |
18-25KW/H |
|
12 |
Cooling Method |
Water Cycling |
Water Cycling |
|
13 |
Type of Drive |
External Annular Gear |
External Annular Gear |
|
14 |
Heating Method |
Direct |
Direct |
|
15 |
Type of Installation |
With Foundation |
With Foundation/Integrated Base |
|
16 |
Noise dB(A) |
≦85 |
≦85 |
|
17 |
Operation Mode |
Intermittent Operation |
Intermittent Operation |
|
18 |
Total Weight(MT) |
25-40 |
25-40 |
|
19 |
Installation Space Required |
30m*10m |
30m*10m |
|
20 |
Manpower |
3~4/batch |
3~4/batch |
|
21 |
Shipment |
Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR |
Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR |
Batch Waste Plastic Pyrolysis Plant
Batch Waste Plastic Pyrolysis Plant,Fuel From Plastic Waste,Plastic To Oil Machine
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com