Manual Ceramic Scum / Slag Gate Valve(GPZ41TC)
Characteristics:
This valve is applicable for high-hardness grains or corrosive media containing soft grains. It's used as an on-off for hydraulic coal transportation, hydralic deslagging and cinder removal and slurry transportation pipelines, with the workint medium being slag water ratio higher >1:5 and the biggest grain ≤5mm. Its working nominal pressure is from PN10 to PN40, and applicable temperature is below 200 Deg C.

All medium-contacting parts are made of structural ceramic with extremely high chemical stability and hardness. Therefore, it has extremetly strong resistance to abrasion, corrosion and erosion, good heat insulation and small thermal expansion.

Its feed inlet is fully through without any blocks, and it has an anti-blcokage blwoing unit, with strong abrasion resistance, a good sealability, a small starting load and little ash seizure or accumulation.

It adopts a high-grade toughened structural ceramic seal, featuring high mechanical strength, strong abrasion resistance, a long service life and a compact structure, which can be installed at any angle.

Special ceramics is different from general ceramics, its hardness even more than steel,
second only to diamond, and corrosion resistant, high temperature resistant!!!!! "" metal
valve with long easy to produce the gap, ceramic valve is not. Because of wear-resisting,
anti-corrosive, sealing strong, ceramic water valve very water saving. "" our valves can be
used 500000 times, if every switch 60 times, can use 22.8 years, this is metal valve can not do it. "

Main Parts and Materials
Application Specification
1. Design and Manufacture: Manufacturer's Standard
2. Face to Face Dimension: GB/T 12221
3. Flange Dimension: GB/T 9113.1, ANSI B16.5  DIN 2543, JIS B2020
4. Inspection and Test: GB/T 9092
5. Material Standard: GB/T 12229 for Carbon Steel, GB/T 12230 for Stainless Steel

Main External and connecting Dimensions
 

  Manual Ceramic Scum / Slag Gate Valve(GPZ41TC)
Characteristics:
This valve is applicable for high-hardness grains or corrosive media containing soft grains. It's used as an on-off for hydraulic coal transportation, hydralic deslagging and cinder removal and slurry transportation pipelines, with the workint medium being slag water ratio higher >1:5 and the biggest grain ≤5mm. Its working nominal pressure is from PN10 to PN40, and applicable temperature is below 200 Deg C.

All medium-contacting parts are made of structural ceramic with extremely high chemical stability and hardness. Therefore, it has extremetly strong resistance to abrasion, corrosion and erosion, good heat insulation and small thermal expansion.

Its feed inlet is fully through without any blocks, and it has an anti-blcokage blwoing unit, with strong abrasion resistance, a good sealability, a small starting load and little ash seizure or accumulation.

It adopts a high-grade toughened structural ceramic seal, featuring high mechanical strength, strong abrasion resistance, a long service life and a compact structure, which can be installed at any angle.

Special ceramics is different from general ceramics, its hardness even more than steel,
second only to diamond, and corrosion resistant, high temperature resistant!!!!! "" metal
valve with long easy to produce the gap, ceramic valve is not. Because of wear-resisting,
anti-corrosive, sealing strong, ceramic water valve very water saving. "" our valves can be
used 500000 times, if every switch 60 times, can use 22.8 years, this is metal valve can not do it. "

Main Parts and Materials
Application Specification
1. Design and Manufacture: Manufacturer's Standard
2. Face to Face Dimension: GB/T 12221
3. Flange Dimension: GB/T 9113.1, ANSI B16.5  DIN 2543, JIS B2020
4. Inspection and Test: GB/T 9092
5. Material Standard: GB/T 12229 for Carbon Steel, GB/T 12230 for Stainless Steel

Main External and connecting Dimensions
 

 

Schindler 9500-35 - optimal price/performance

Versatility on demand
Schindler 9500 moving walks share the design versatility of Schindler escalators. There is a wide choice of materials, finishes, colors, sizes, lighting and other options that can be combined to produce customized solutions. It can accommodate transportation lengths up to 100 meters.

• Inclination from 0° to 3°
• Pallet widths of 800 mm and 1000 mm
• Balustrade heights of 900 mm and 1000 mm
• Balustrade panels available in multiple color options, brushed stainless sandwich panels, or powder coated sheet steel
• Two balustrade design variants
• Balustrade profiles and deckings in stainless steel or powder-coated aluminum
• Cladding available in stainless steel or painted sheet steel
• A choice of stainless steel or ribbed aluminum floor covers
• Various lighting options, including balustrade and skirt lighting
• Can be installed indoors and outdoors, covered.
  

Schindler 9500-45 - plenty of space to maneuver

The high-performance moving walk for long distances
With the maximum pallet width of 1400 mm it is possible to accommodate as many as 16,000 passengers per hour. Schindler 9500-45 is able to cover high transport volumes and transportation lengths of up to 150 meters.

Flat construction
The flat construction of Schindler 9500-45, which has no truss and is only 400 mm high in its central part, is a great advantage when space is at a premium.

Long service life
The extremely stable pallets, with a depth of 400 mm, and the durable connection elements are built to withstand even the most punishing use. The robust stainless steel balustrade and the solid, steel-reinforced newel end are virtually resistant to damage caused by carelessness or vandalism.

Schindler 9500 10/15 - inclined moving walk

Especially developed for shopping malls, Schindler 9500 10-15 inclined moving walks provide quiet, comfortable transportation from floor to floor, even with a fully loaded shopping cart. Schindler products never compromise quality, assuring dependable performance and passenger safety. Streamlined and flexible in design, these units leave plenty of room for architectural expression, indoors or out.

Streamlined construction
No moving walk on the market is more compact than the Schindler 9500/10-15.

• Incline ranging from 10° to 12°
• Short installed lengths
• Ideal for covering short distances
  
• 10° flat combs at both ends allow shopping carts to roll on and off easily
• Ideal for outside use
  
• Pallets are guided beneath the skirt for maximum user safety
•  Cambered pallet surface delivers excellent grip when damp or wet.
  

Small installation dimensions
Patented short pallets with a depth of only 133 mm greatly reduce the transition curves. As a result, these moving walks require minimum installation space.

Schindler Moving Walk Spare Parts

Schindler Moving Walk Spare Parts,Schindler Travelator Spare Parts ,Schindler Moving Sidewalk Spare Parts

CEP Elevator Products ( China ) Co., Ltd. , https://www.elevatorcomponent.nl