Waste Hydraulic Oil Recovery System (TYS Series)
Application
The TYS series waste oil decoloration vacuum oil purifier machine is designed to efficiently remove gas, water, particulates, free carbon, and volatile substances (such as alcohol, gasoline, and ammonia gas) from used oils. This system enhances oil quality, restores color, viscosity, and flash point of the oil. It can be used for purification and decoloration of hydraulic oil, machinery oil, coolant oil, cooking oil, and coconut oil in various industries such as oil fields, mines, metallurgy, power generation, transportation, manufacturing, and food processing. The treated oil becomes clear, transparent, and regains its original properties. In some cases, it even meets the standards of new oil. The entire process involves purely physical treatment without breaking down the oil components.
Features
1. Strong purification capability with a fine filtration system that effectively removes fine particles.
2. Automatic back-flushing function for cleaning impurities after treatment.
3. Advanced dielectric absorption cooling system.
4. Pressure protection device, automatic heating with temperature control, automatic condensate separation, online drainage, easy operation, and high safety.
5. High-quality filter materials with large dirt-holding capacity, strong corrosion and heat resistance, high mechanical strength, high precision, and long service life.
6. Unique degassing and dewatering system using stereoscopic evaporation and multi-level oil-water separation technology to quickly remove water, gas, and other impurities.
7. Uses special additives to remove color.
Working Principle
During operation, contaminated oil enters the heater through the inlet under atmospheric vacuum suction. The heated oil then flows into the pre-filter to remove large particles. After that, it enters the vacuum separator, where a special divergence device increases the oil's surface area within a unit volume, allowing it to be exposed to a low humidity environment to remove water, air, and gases. The mixed gases, consisting of evaporated water and gases, are condensed into liquid form in the water tank and cooler. The liquid then flows into the water receiver, while remaining air is evacuated by vacuum. The oil without water is transported to the fine filter via an oil pump to remove suspended impurities and produce clean oil. The purification process may require several cycles depending on the moisture content of the oil. Finally, the purified oil is processed by the decoloring system to become new oil.
Main Structure
1. Purification system
2. Vacuum dewatering system
3. Vacuum degassing system
4. Decoloring system
5. Electronic control system
Technical Parameters
| Parameters | Unit | TYS-10 | TYS-20 | TYS-30 | TYS-50 | TYS-100 | TYS-150 | TYS-200 | TYS-300 |
|------------|------|--------|--------|--------|--------|---------|---------|---------|---------|
| Flow Rate | L/min | 10 | 20 | 30 | 50 | 100 | 150 | 200 | 300 |
| Working Vacuum Degree | MPa | -0.06 ~ -0.095 | -0.06 ~ -0.095 | -0.06 ~ -0.095 | -0.06 ~ -0.095 | -0.06 ~ -0.095 | -0.06 ~ -0.095 | -0.06 ~ -0.095 | -0.06 ~ -0.095 |
| Working Pressure | MPa | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 |
| Temperature Range | °C | 0~100 | 0~100 | 0~100 | 0~100 | 0~100 | 0~100 | 0~100 | 0~100 |
| Power Supply | – | 380V/50Hz/3Phase (Customizable) | 380V/50Hz/3Phase (Customizable) | 380V/50Hz/3Phase (Customizable) | 380V/50Hz/3Phase (Customizable) | 380V/50Hz/3Phase (Customizable) | 380V/50Hz/3Phase (Customizable) | 380V/50Hz/3Phase (Customizable) | 380V/50Hz/3Phase (Customizable) |
| Working Noise | dB(A) | ≤65~80 | ≤65~80 | ≤65~80 | ≤65~80 | ≤65~80 | ≤65~80 | ≤65~80 | ≤65~80 |
| Trouble-free Working Time | H | ≥4000 | ≥4000 | ≥4000 | ≥4000 | ≥4000 | ≥4000 | ≥4000 | ≥4000 |
| Continuous Working Time | H | ≥150 | ≥150 | ≥150 | ≥150 | ≥150 | ≥150 | ≥150 | ≥150 |
| Electric Heating Power | kW | 36 | 40 | 45 | 72 | 80 | 90 | 120 | 135 |
| Total Power | kW | 38 | 42 | 47 | 75 | 87 | 101 | 135 | 147 |
| Inlet (Outlet) Caliber | mm | Φ25 | Φ25 | Φ25 | Φ32 | Φ42 | Φ50 | Φ50 | Φ60 |
| Weight | kg | 350 | 380 | 400 | 450 | 550 | 650 | 700 | 750 |
| Size (Length) | mm | 1500 | 1500 | 1500 | 1600 | 1750 | 1900 | 1950 | 2100 |
| Size (Width) | mm | 1000 | 1050 | 1050 | 1150 | 1150 | 1600 | 1600 | 1600 |
| Size (Height) | mm | 1600 | 1600 | 1650 | 1700 | 1750 | 1950 | 1950 | 2000 |
Guarantee Indexes
| Water Content | PPM | ≤50 |
| Gas Content | % | 0.1 |
| Impurity Size | μm | ≤1 (Customizable) |
| Demulsification Value | – | New oil ≤15min, operating oil ≤30min |
| Clean Degree | Grade | ≤4 (NAS 1638) |
| Color | L | ≤2 |
Our Company
Located in Chongqing, a key electromechanical manufacturing center in southwest China, Chongqing TOP is a professional manufacturer and supplier of oil purifiers and related testing equipment. We have departments dedicated to R&D, machinery production, instrument manufacturing, and quality control. With mature technology and a highly skilled team, our products are known for their high quality, ease of use, excellent performance, and long service life.
TOP oil purifiers are widely used in electric power, petrochemicals, mining, shipbuilding, steel construction, bridges, automobiles, and railways. They help reduce energy consumption and environmental pollution. We offer reliable solutions such as transformer oil purifiers, turbine oil purification machines, hydraulic oil purifiers, lubricating oil filtration machines, fuel oil restoration systems, oil and water separators, oil regeneration equipment, and waste oil recycling systems.
TOP Testers specialize in the development, production, marketing, technical support, and after-sales service of petrochemical analyzers, transformer substation electrical testing equipment, and circuit detection devices. Our main products include water content testers, surface/interface tension testers, flash point testers, kinematic viscosity testers, oil acidity testers, insulation oil dielectric strength testers, transformer characteristic testers, relay protection testers, and high-voltage testing equipment.
Honest Team – We always treat you honestly and strive to ensure your satisfaction.
Sincere Communication – We communicate sincerely to guarantee that our products meet your expectations.
Reliable Quality – Every product undergoes strict quality control and testing to ensure high performance.
Service Commitment – We provide prompt, considerate, and professional after-sales service and technical support.
Key Words: oil color change, diesel discoloration, black engine oil decolorization system, waste oil decolorization, diesel oil decolorant, engine oil decolor, diesel oil color removal, oil decolorization equipment, oil recycling and discoloration, cooking oil cleaning machine, cooking oil filter machine, used vegetable oil filtering machine, used edible oil purifier, used cooking oil purification machine, used cooking oil recycling machine, cooking oil purifier, cooking oil filtration machine, waste cooking oil recovery unit, lubricant oil decolor, diesel oil decolorization, fuel oil decolorization.
Customized Nitrogen Generator For Laser Cutting
High power fiber laser cutting equipment has many common pain points in different cutting and processing scenarios of sheet metal:
Using oxygen for cutting thin carbon steel has slow efficiency and is prone to slagging.
The cutting cost of carbon steel with liquid nitrogen is high, and the cutting surface is rough; Severe slag sticking on medium and thick carbon steel; unable to cut thick carbon steel
Severe slag accumulation during air cutting of carbon steel increases polishing costs
Using oxygen to cut carbon steel requires high requirements for the sheet metal, with multiple oxidation layers, severe rust, and materials that all affect the stability of cutting quality
Cutting a large amount of stainless steel or carbon steel with air can easily cause contamination of optical lenses
Using liquid nitrogen to cut aluminum plate has severe slag hanging and poor cross-sectional quality.
In order to ensure cutting efficiency and effectively reduce cutting costs, Suzhou Xinrui Purification Equipment Co., Ltd. has launched two types of laser cutting specialized nitrogen production devices, PSA nitrogen generators and membrane nitrogen generators, after years of dedicated research and development and extensive process testing.
Customized Nitrogen Generator for Laser Cutting Application,Low Purity Fiber Laser Cutting N2 Generator,Laser Cutting N2 Generator
Suzhou Xinrui Purification Equipment Co.,Ltd , https://www.gas-equipment.net