Domestic and foreign electronic measuring instrument industry gap

Domestic and foreign electronic measuring instrument industry gap Although China's electronic measuring instrument industry has made great progress in recent years, the gap with foreign manufacturers is still very large, mainly reflected in the following aspects:

1. The popularity of digital electronic measuring instruments has yet to be improved. The "digital era" has come. The "digital era" is the latest symbol of social and economic modernization. It is related to the level of "core competitiveness" of a country in the field of science and technology. If insufficient attention is paid to it, a country will lose its leading position in technology. status.

2. Modularization. This is the direction of the development of international electronic measuring instruments. In fact, modularization, bus technology, and software technology are three-in-one, not "mechanical" modularity, and its difficulty is no less than bus technology and software technology in our electronic measurement. Instrument companies have not started well.

3. The bus technology is very different. VXI, PXI, LXI, USB interface, bus technology have been developed to a very high level in electronic measuring instruments. At present, there are three trends driving the development of the test and measurement industry: First, there must be system-ready hardware, that is, modular products, that can quickly build a system. Second, there must be standards-based, PC-compatible input and output interfaces, as well as input and output drivers that can be based on local area networks or the Internet. Third, there must be a flexible software solution, regardless of the customer needs is the Excel interface, the text interface can give customers a flexible choice. The international LXI (LANeXtensionforInstrument) alliance was created to cater to this change. Foreign companies have already developed LXI bus products. Some domestic universities have started research. Domestic electronic measuring instruments have not yet been involved. If it is too late, it will once again widen the gap between China's electronic measuring instruments and the level of international technology. Therefore, China's electronic measuring instruments Enterprises should start the application of LXI bus technology in electronic measurement instruments as soon as possible.

4. Software technology. There is no software technology for electronic measuring instruments. It is as if our electronic measuring instruments are still in the “cold weapons” era. However, software technology is still far from being reflected in our electronic measuring instruments. This does not solve our electronic measuring instruments forever. It is not a modern level electronic measuring instrument.

5. Integrated technology. Electronic measurement instrument hardware, ie, electronic circuit technology, coaxial device component technology, waveguide device component technology integration technology, is an important core technology in electronic measurement instruments. It is combined with bus technology, software technology, and modularization technology to form a modernization. Electronic measuring instruments, this is a difficult problem that our electronic measuring instrument companies still have to overcome.

China is a big country. The electronic measurement technology it needs is comprehensive and world-class. Since 2000, the world’s electronic measuring instruments have made tremendous technological progress. It is expected that in the next few years, the electronic measuring instrument industry will Driven strongly, based on SDR (software-defined radio) measurement instruments and multi-field instrument interoperability expansion as a hot spot, LXI and USB will be used as a link bus space, will obtain more technological innovation, and actively promote the development of electronic devices, electronic applications , Forming a positive interaction.

“The domestic market for electronic measuring instruments is about 10 billion yuan, and the sales volume is over 7 million. The growth rate is above 20%. It should be said that the demand for electronic measuring instruments is very strong.” Luo Baihui believes that the total market for electronic instruments in China is in the ten billion US dollars. About the world, it should be among the best in the world.

How large is China's electronic measuring instrument market? Instrument World World Network says it is actually a question that is difficult to clarify. It is bigger than we think. The number of electronic instruments and equipment imported by various companies registered and registered in mainland China amounted to US$15 billion, of which foreign-owned enterprises accounted for 61.7%, Chinese-foreign joint ventures accounted for 9%, state-owned enterprises accounted for 12%, private enterprises accounted for 11%, and collectively Enterprises accounted for 2%, and Chinese-foreign cooperative enterprises accounted for 3%.

HWS Anti-corrosion Pipeline Heat Shrink Sleeve

Product Introduction:
HWS Anti-corrosion Pipeline Heat Shrink Sleeve is also known as heat shrink weld belt/Heat shrinkable weld sleeve (belt), made by irradiation cross-linked polyolefin base material and special sealing hot melt adhesive. WHR Three Layers Heat Shrink Sleeve For Anti-corrosion it has high mechanical strength, stable performance, aging resistance, anti chemical corrosion, sealing, strong adhesive strength, easy to operate, etc.
 
Product Application:
 HWS Heat Shrinkable Joint Sleeve For Steel Pipeline

a) Pipeline Engineering Tubing Apply to petroleum, nature gas, chemical engineering, fuel gas and others project pipeline network for anti-corrosion of steel pipeline repaired and welded junction.And also apply to corrosion resistant coating for repairing the breakage.
b) Apply to 2PE, 3PE, FBE,PP,CTE anti-corrosion coating pipeline for anti-corrosion of welded junction and bend area.
 
Specification:
When using the heat shrink sleeves, first preheat the pipeline up to 55 degrees Celsius~60 degrees Celsius, and then wrap the joint belt around the treated pipeline with the heat shrink joint belt, make sure that the heat shrink joint belt lap width is more than 50mm, it will shrink at radial direction when the heat effects on it, at the same time the hot melt adhesive start to melt, fill and cover the surface of the pipeline, form continuous and close anti-corrosion system with original pipeline anti-corrosion coating.

Executive Standard: SY/T0413-2002 and SY/T4054-2003 and GB-T23257-2009.
 
Features & Benefits
a) excellent adhesion ability, adhesion range is wide: can adhere with steel, PE, epoxy coating, etc.
b) strong in corrosion resistance:can effectively block a variety of medium permeability and corrosion, aging resistance, environment stress cracking resistance, resistance to UV irradiation.
c) High mechanical strength: compression resistance, shock resistance, shear resistance.
d) Wide use range: can instruct at -25~35 degrees Celsius temperature range.
e) No volatilization, safety in use, can save energy, can protect environment
f) Long service life.
g) Shrink fast, easy to operate, simple to install.
h) low preheat temperature: when preheat -55~60 degrees Celsius, can install it to shrink.

 Other size can customized according to customers' request.

HWS Anti-corrosion Pipeline Heat Shrink Sleeve



Pipeline Engineering Tubing/sleeves

Pipeline Engineering Tubing,Pipeline Insulation Tape,Heat Shrink Polyethylene,Polyethylene Terephthalate Tubing

KEYUACE Materials Co., Ltd. , http://www.insulationtubing.com

Posted on