Sometimes when we are on the road, we encounter accidental vehicles in front or slow speeds that require overtaking. However, novice drivers in the urban areas did not dare to overtake, do not know how to overtake! ! !
We can divide the overtaking into three phases. The novice driver pays attention:
Stage 1: Overtaking Preparation
What is the first thing to do when passing a train? Follow the car
After going ahead and overtaking the vehicle, the distance between the vehicles is determined by the speed, which is probably one foot accelerator that can be rushed up and one foot brake can stop it.
distance;
The second stage: Then it is to see, first look at the driver's side mirror, see if there is no car behind it is also ready to go beyond, if not, go to the third step;
The third stage: Signaling, generally left turn lights, of course, whistle, double eyes, flashing headlights in an emergency. However, headlamps, whistle and double gongs can only be used when they are relatively urgent, otherwise they will affect other people's normal driving and will be reprimanded.
The final step in preparation for overtaking is the “probeâ€. Of course, instead of asking you to get your head out, you will explore the front part. This part is best used on township roads and national highways, because the road is opposite. In addition, this side lane does not have a clear lane limit like the urban highway. At this time, in order to prevent collision with the opposite vehicle when passing, we must keep the distance from the car and steer the head of the vehicle to overtake. Half body width to clearly see the opposite
If you do not properly handle the safety issues in overtaking, accidents may occur at any time. Therefore, overtaking should be done at high speed:
1. Before the overtaking, turn on the left turn signal and horn to indicate that the lights should be constantly switched on and off during the overtaking at night, and the left car can only be passed from the left side of the preceding car after waiting for the fork to express.
2. After passing the front car, it is not possible to enter the original driving route prematurely, and after maintaining the necessary safety distance with the passing car, turn on the right turn signal and drive back to the original lane.
3. Before overtaking, it is necessary to correctly judge the speed at which the other party is approaching the vehicle and decisively decide whether it can exceed the preceding vehicle and must overtake the vehicle with 100% certainty.
4. When the current car does not give way, it must not be forced to exceed, so as to avoid accidents.
5. When the vehicle ahead is overtaking, the vehicle is not allowed to pass. Because the speed is increasing during the overtaking, the overtaking distance and the lateral spacing are not allowed to overtake. If you overtake the overtaking vehicle, the road conditions permit this type of overtaking, speeding, and vehicle parallelism. Across the car to travel, it is easy to cause accidents.
6. Do not overtake on roads that are not overtaking!
FM-P Series Fiber marking machine is designed with Europe standard, DO+4 protect glass,independent research and development of the first autofocus function which can all intelligent automatic inspecting thickness and automatic calibration, without manual operation.
The main feature is as below
- Small size
- Auto focus
- One key marking
- Full automatic
- Europe protect standard, Class DO+4 protect glass
Full Protect Type Laser Marker
Fiber Laser Marking Machine,Full Protect Type Laser Marker,Laser Etcher For Metal,Fibre Laser Marking Machine
Shandong Meiman Laser Technology Co., Ltd. , https://www.meimanlasers.com