The I-beam cable slip series is a conductive form of power supply for the crane trolley. It consists of wheels, brackets and brackets. It fixes the flexible cables on the pallets and synchronizes them with the cable pulleys to achieve the purpose of power supply to the trolleys.
I-beam cable slip technology features
1. After the fixed wire rack is installed, a blocker should be hung behind.
2. Adjust the traction head so that the trolley does not touch the upper and lower edges of the traction hole during the entire journey.
3, the cable length is 1.2 times the crane span plus 8 meters.
4. Adjust the traction wire rope so that its length is less than the length of the same cable, and the traction wire rope is forced when running.
5, when the cable diameter is not equal, the cable clamp should be cushioned with a soft rubber, so that the outer diameter is basically the same, in order to clamp the cable.
6. When distributing cables, consideration shall be given to the balanced force of the two cable trays.
7, when the cable pulley is two, three, different requirements.
8. The double washers on the pulley device are adjusting washers. When the guide rails are not fit, the washers are placed on the inside of the fixing plate to adjust the width of the gauge. The factory is according to the guide 1160x88x6.
I-beam cable slip technology features
1. After the fixed wire rack is installed, a blocker should be hung behind.
2. Adjust the traction head so that the trolley does not touch the upper and lower edges of the traction hole during the entire journey.
3, the cable length is 1.2 times the crane span plus 8 meters.
4. Adjust the traction wire rope so that its length is less than the length of the same cable, and the traction wire rope is forced when running.
5, when the cable diameter is not equal, the cable clamp should be cushioned with a soft rubber, so that the outer diameter is basically the same, in order to clamp the cable.
6. When distributing cables, consideration shall be given to the balanced force of the two cable trays.
7, when the cable pulley is two, three, different requirements.
8. The double washers on the pulley device are adjusting washers. When the guide rails are not fit, the washers are placed on the inside of the fixing plate to adjust the width of the gauge. The factory is according to the guide 1160x88x6.
Fiber Laser Marking Machine,High Quality Fiber Laser Marking Machine,Fiber Laser Marking Machine Details, CN
Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com