Ultrasonic flowmeter correct maintenance method

The ultrasonic flowmeter uses a variety of measurement flow in place and after the field process has been used, then how to carry out maintenance and maintenance? How can we extend its service life measures?
To verify verification in time:
For users who install a large number of fixed ultrasonic flowmeters on site and have a wide range of users, we can provide a portable ultrasonic flow meter of the same type to be used in nuclear school field instrumentation. One is to adhere to one school and one school, that is, every new ultrasonic flowmeter is to be calibrated at the time of installation and commissioning to ensure good location, good installation, and accurate measurement; secondly, when a sudden change occurs in the flow rate of the ultrasonic flowmeter running online, Use a portable ultrasonic flow meter to perform a timely nuclear audit, find out the cause of sudden changes in flow, and find out whether the instrument has failed or if the flow does change. In this way, the use of the flowmeter can be monitored and problems can be detected and maintained.
To maintain regularly:
Compared with other flowmeters, the maintenance of ultrasonic flowmeters is relatively small. For example, for ultrasonic transducers with external transducers, there is no loss of water pressure after installation, and there is no potential for water leakage. It is only necessary to periodically check if the transducer is loose and the adhesive between the pipeline is good; Ultrasonic flowmeter, you need to regularly clean up the impurities deposited on the probe, scale and other leaks; integrated ultrasonic flowmeter, to check the flowmeter and the flange between the pipeline is good, and consider the site temperature and humidity Impact on its electronic components, wait. Regular maintenance can ensure long-term stable operation of ultrasonic flowmeters. Let's implement it now. The maintenance of instrumentation is a long-term process. Other instruments and instruments are the same.

Star Discharge Valve

Q: Are you trading company or manufacturer ?

A: We are factory.

 

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

 

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

Star Discharge Valve

Star Discharge Valve,Discharge Valve,Dust Discharge Valve,Star Type Air Discharge Valve

Hebei Wangjing Environmental Protection Co., Ltd. , https://www.wjdustcollector.com

Posted on