First of all, if it is a solid wood floor, floor heating can easily lead to overheating of the floor temperature, and problems such as dry cracking occur. However, because solid wood flooring requires a keel, it is not necessary to raise the floor to warm the pipeline. If you use reinforced or composite flooring, you should choose a trusted brand of environmentally friendly flooring, because the warmth of the floor will allow the plastic in the laminate flooring to emit more harmful substances. Tiles are also available, but later maintenance is very troublesome.
Geothermal floors must go through four cycles of rigorous testing during their production. That is, the floor is cooked in hot water at 100°C for 4 hours → baked in an oven at 60°C for 20 hours → cooked in hot water at 100°C for 3 hours → frozen at minus 20°C for 2 hours. Round-trip four times to ensure long-term high-temperature floor, no cracking, no degumming, anti-moisture, no deformation, no warping. The last point is green.
In the heating and cooling defects of the floor, this problem is often asked by the people in the home for the floor heating system. I think this should be based on specific analysis and cannot be done in one piece or generalized. First of all, we must pay attention to the floor heating system, although in some cases limiting some of the choices, but after all, heating time is only a small part of the year, most of the time we do not heat the heating, so the existence of floor heating system only Can be used as a supplementary condition for reference.
In terms of function:
For the visual sense: the floor has good color and softness, and the affinity is very good (this is also one of the reasons why you often recommend flooring when you ask relatives and friends). The floor tiles give people a hard feeling.
For insulation performance: the floor has an advantage for the insulation of the room temperature, while the floor tiles have a relatively poor insulation performance due to the fast heat conduction. Especially in the unheated but spring or autumn approaching winter and in the winter when the heating is not on, the entire ground feels very cold and uncomfortable. If the house is located in the north, the situation will be more serious;
For personal protection: In the family with children and the elderly, because the child's naughtiness is active and the elderly are inconvenient in action, it is easy to have a family accident that falls and rubs, and then the floor tiles will hurt the elderly and children undoubtedly than the floor. Seriously more, so for families like this kind of staff structure, I suggest to choose the floor.
For cleaning and maintenance: For the current floor and floor tiles, because the floor area is the same size, ordinary cleaning (such as cleaning of dust, oil, and water traces) is the same as cleaning time, physical exertion, and effectiveness. However, because there are cracks in the floor, oil and water traces can enter the gap in the floor, so the damage to the floor is more serious, while the floor tiles are almost no harm.
In general, the use of geothermal heating is the best heating method. As the saying goes, good horses have good saddles. A good floor heating system needs to be matched with a suitable geothermal floor. Because of the special features of the geothermal floor and the complexity of the geothermal system, special attention should be paid to the maintenance and maintenance (especially heating and moisturizing).
1, pay attention to warming step by step
Geothermal heating, should pay attention to slowly warming. When used for the first time, gradually increase the temperature in the first three days of heating: the first day water temperature is 18°C, the next day is 25°C, the third day is 30°C, and the fourth day can be raised to normal temperature, ie water temperature 45°C, surface temperature 28 °C~30°C. The temperature cannot rise too fast. Otherwise, the floor may crack and twist due to expansion. In addition, when the geothermal heating system is turned on again after a long time, it must be heated in strict accordance with the heating program as it was for the first time.
2, the surface temperature can not be too high
It should be noted that with geothermal heating, the surface temperature should not exceed 28°C, and the temperature of the water pipes should not exceed 45°C. If this temperature is exceeded, the service life and life cycle of the floor will be affected. In the average family, the room temperature in winter reaches about 22°C, and it is already very comfortable.
3, turn off the geothermal system and pay attention to gradual cooling
As the seasons go by, when the weather is warm and the room no longer needs a geothermal heating system, care should be taken to shut down the geothermal system. The cooling process of the floor should also be gradual. If the cooling rate is too fast, it will also affect the life of the floor. In cold winter days, no one in the room can reduce the heating and cooling, but you can't close the valve and must be regulated above 0°C.
4, can be considered when the room is too dry
In winter, the climate is dry, and geothermal heating is used. If the floor is exposed to high temperatures for a long time, it will be easy to crack. At this time, it is necessary for the owner to humidify the room to prevent the floor from cracking and deforming.
5, the floor surface should try to keep the air circulation
As the surface of the floor is a heat dissipation surface, the floor should not be used as a fixed decoration or legless furniture. It is also not suitable to build a platform to avoid affecting the flow of hot air, resulting in poor heating of the room. Due to the relatively high surface temperature of the floor, it is best not to place glassware and chinaware directly on the ground in winter when using a geothermal heating system, so as to avoid uneven heating, heat expansion and contraction, and rupture of the vessel. .
Geothermal floors must go through four cycles of rigorous testing during their production. That is, the floor is cooked in hot water at 100°C for 4 hours → baked in an oven at 60°C for 20 hours → cooked in hot water at 100°C for 3 hours → frozen at minus 20°C for 2 hours. Round-trip four times to ensure long-term high-temperature floor, no cracking, no degumming, anti-moisture, no deformation, no warping. The last point is green.
In the heating and cooling defects of the floor, this problem is often asked by the people in the home for the floor heating system. I think this should be based on specific analysis and cannot be done in one piece or generalized. First of all, we must pay attention to the floor heating system, although in some cases limiting some of the choices, but after all, heating time is only a small part of the year, most of the time we do not heat the heating, so the existence of floor heating system only Can be used as a supplementary condition for reference.
In terms of function:
For the visual sense: the floor has good color and softness, and the affinity is very good (this is also one of the reasons why you often recommend flooring when you ask relatives and friends). The floor tiles give people a hard feeling.
For insulation performance: the floor has an advantage for the insulation of the room temperature, while the floor tiles have a relatively poor insulation performance due to the fast heat conduction. Especially in the unheated but spring or autumn approaching winter and in the winter when the heating is not on, the entire ground feels very cold and uncomfortable. If the house is located in the north, the situation will be more serious;
For personal protection: In the family with children and the elderly, because the child's naughtiness is active and the elderly are inconvenient in action, it is easy to have a family accident that falls and rubs, and then the floor tiles will hurt the elderly and children undoubtedly than the floor. Seriously more, so for families like this kind of staff structure, I suggest to choose the floor.
For cleaning and maintenance: For the current floor and floor tiles, because the floor area is the same size, ordinary cleaning (such as cleaning of dust, oil, and water traces) is the same as cleaning time, physical exertion, and effectiveness. However, because there are cracks in the floor, oil and water traces can enter the gap in the floor, so the damage to the floor is more serious, while the floor tiles are almost no harm.
In general, the use of geothermal heating is the best heating method. As the saying goes, good horses have good saddles. A good floor heating system needs to be matched with a suitable geothermal floor. Because of the special features of the geothermal floor and the complexity of the geothermal system, special attention should be paid to the maintenance and maintenance (especially heating and moisturizing).
1, pay attention to warming step by step
Geothermal heating, should pay attention to slowly warming. When used for the first time, gradually increase the temperature in the first three days of heating: the first day water temperature is 18°C, the next day is 25°C, the third day is 30°C, and the fourth day can be raised to normal temperature, ie water temperature 45°C, surface temperature 28 °C~30°C. The temperature cannot rise too fast. Otherwise, the floor may crack and twist due to expansion. In addition, when the geothermal heating system is turned on again after a long time, it must be heated in strict accordance with the heating program as it was for the first time.
2, the surface temperature can not be too high
It should be noted that with geothermal heating, the surface temperature should not exceed 28°C, and the temperature of the water pipes should not exceed 45°C. If this temperature is exceeded, the service life and life cycle of the floor will be affected. In the average family, the room temperature in winter reaches about 22°C, and it is already very comfortable.
3, turn off the geothermal system and pay attention to gradual cooling
As the seasons go by, when the weather is warm and the room no longer needs a geothermal heating system, care should be taken to shut down the geothermal system. The cooling process of the floor should also be gradual. If the cooling rate is too fast, it will also affect the life of the floor. In cold winter days, no one in the room can reduce the heating and cooling, but you can't close the valve and must be regulated above 0°C.
4, can be considered when the room is too dry
In winter, the climate is dry, and geothermal heating is used. If the floor is exposed to high temperatures for a long time, it will be easy to crack. At this time, it is necessary for the owner to humidify the room to prevent the floor from cracking and deforming.
5, the floor surface should try to keep the air circulation
As the surface of the floor is a heat dissipation surface, the floor should not be used as a fixed decoration or legless furniture. It is also not suitable to build a platform to avoid affecting the flow of hot air, resulting in poor heating of the room. Due to the relatively high surface temperature of the floor, it is best not to place glassware and chinaware directly on the ground in winter when using a geothermal heating system, so as to avoid uneven heating, heat expansion and contraction, and rupture of the vessel. .
Laminated Motor Core Press Line, Laminated Transformer Press Line, Laminated mortor core press line, motor core press, transformer core press line is consist of
material uncoiler, " S " Shape straightening device, High speed feeder, high speed press body as well as collector system, after added motor core die, it is a complete production line for various laminated motor cores( Motor stator, Motor rotor, Iron core (Magnetic core), Electric motors, transformer EI products,
Laminated press line with high precision and high stability performance, the capacity is range from 63 ----- 400 tons. it will match single rows to three rows motor core lamination dies, transformer die, motor laminated die or progressive stamp die for motor core.
Normally, Motor core lamination will be silicon with 0.3--0.6mm thickness.
Laminated Motor Core Equipment
electric motor laminations,Laminated Motor Core Equipment,Motor Core Equipment,motor laminations
Satis Products Co., Ltd. , http://www.satismachinery.com