Valin Hanmar H3 compressed garbage truck Garbage truck classification:
Dump-type garbage truck, swing arm type (ground pit dual-purpose type) garbage truck, sealed garbage truck (seal type, front slide type, hydraulic flip type garbage truck), hanging garbage truck, pull arm type Garbage trucks (hook-arm garbage trucks, detachable garbage trucks), compression garbage trucks (side loading, rear loading and unloading compression garbage trucks), kitchen garbage trucks (dump trucks), etc.
working principle:
Compression garbage trucks (hereinafter referred to as garbage trucks) are used in the special vehicles for collecting, transporting, and unloading waste, bags, and bulk garbage in cities and towns. Garbage is pushed into the carriage by the vehicle garbage propeller, also called the negative pressure mechanism, so that the garbage has a higher density and is more evenly distributed in the carriage until it is full; the garbage collection system is currently accepted throughout the country. The waste collection and transportation system, the effectiveness of its special assembly are powered by the car engine, manually or electronically controlled by the hydraulic mechanism. The box and loader of the vehicle, also known as the bucket body and the recovery tank, are all made of high-quality carbon steel plates. The welded parts are tested for flaws, and the mechanism has good sealing properties, such as high strength, light weight, and no secondary pollution.
Garbage truck loading features:
1. The garbage collection method is simple: The compression garbage truck is fully sealed, and the sewage in the compression process directly enters the sewage chamber, completely solving the secondary pollution in the garbage transportation process.
2, high compression ratio, large load: the maximum crushing pressure of 12 tons, loading capacity is equivalent to 2.5 times the same tonnage non-compression garbage truck;
3. Automated operation: The automatic control system of machine, electricity, and liquid is adopted, and the garbage is loaded, crushed or flattened, and the waste is finally filled with rubbish, mainly through carriages, fillers, push shovels, and hydraulic systems. Compaction is squeezed into the carriage and transported to the destination for automatic unloading. The garbage collection method is simple, efficient, and has functions such as repeated compression and peristaltic compression. The operation is automated, the power is strong, the environmental protection is good, and the utilization efficiency of the entire vehicle is high. All the filling and unloading operations require only one driver to operate, and two types of automatic and semi-automatic operation modes can be set. This not only reduces the labor intensity of the sanitation workers, but also greatly improves the working environment.
4. Good economy: When the special equipment is working, the computer control system will automatically control the throttle to achieve the best fuel-saving effect;
5, the system safety factor is high: The operating system has adopted the computer control and the manual operation dual function, greatly guarantees the vehicle normal work, has enhanced the vehicle use efficiency;
6. Turnover mechanism: It can be equipped with an inverting mechanism with a trash can or a rubbish bucket; with a lifting rack for hanging buckets, it can be used with the national general-purpose iron hanging or plastic hanging buckets, and powerful loading, pushing the garbage into the compartments and compacting And shirk, in the transport process to prevent the spillage of the load.
Valin Municipal Utility Vehicle Chassis:
Valin Hanmar H3 compression garbage truck chassis parameters
Advantage 1: Lightweight Chassis
★ Using finite element analysis as a platform, carrying out stress analysis on the cab in different road conditions, through continuous optimization, increasing or decreasing the thickness of the plate, changing the parameters of key parts, not only satisfying the overall strength and stiffness requirements of the chassis, but also reducing the weight;
Advantage two: high reliability cab
★ Adopt the European popular cage structure;
★ The skin is a high-strength steel plate to ensure the cab's impact resistance;
★ Continuation of the reliability structure of the previous generation product Xing Kaima, and appropriately reduce the internal skeleton section, a reasonable material thickness reduction, reducing the weight of the cab;
Advantage three: system optimization configuration
★ The special chassis for the Hanma H3 municipal sanitation category uses Yuchai's YC4EG series engines in the mainstream market, Fast 8-speed gearboxes, economical and practical, reliable and cost-effective.
Advantage four: exempt from purchase tax
★ The compression garbage truck is exempted from announcements, and customers can purchase the vehicles without being subject to vehicle purchase tax.
Crank Sensor,Sensor Ckp,Ckp Sensor,Throttle Pedal Position Sensor
ruian kenovi automotive electronic co ltd , https://www.kenovipower.com