The advantages of pure suction vacuum cleaner

1. The structure is simple: There is no hydraulic motor rotation mechanism, no adjustment mechanism such as sweep brush and roller brush.
2. Easy to operate: Only need to use the control panel in the cab to conveniently operate the start and stop of the auxiliary engine, the fan speed up and down, the lifting and lowering of the suction port, the rear door switch, the box lifting, and the sprinkler switch.
3 , no secondary dust (for large dust): pure suction operation, no back blowing, using a unique, advanced, patented high-efficiency filtration system, can not enter only.
4 , the use of low cost: there is no frequent replacement of the brush, only a small amount of rubber consumables. Annual maintenance costs are low. Compared with manual cleaning, it can save 240,000 yuan per year . And tradition Compared with road sweepers , it saves RMB 120,000 per year .
5 , dust removal effect is good: the garbage collected into the box after repeated collection of dust, through gravity dust, inertial dust removal and other multi-stage can achieve the separation of particles and dust, truly able to absorb and survive. In addition, adopting a dry-type dust-removing and dust-removing mechanism with an independent research and development patent can realize automatic on-line and off-site cleaning, with good dedusting effect and no need of personnel involvement (applicable to areas with large dust ratio).
6. Strong on timeliness : It has a long duration and can be used as usual regardless of day and night, or in the cold winter season. It reflects the all-weather, all-day homework design concept.
7. Improve cleaning efficiency and reduce cleaning costs: A vacuum cleaner is equivalent to the labor efficiency of more than 30 cleaners, saving the cost of employing cleaners and the management costs of personnel, and at the same time saving the cost of purchasing cleaning tools.

Production Description:

Drag Chain is suitable for the cnc machine tools, machining centers, automated machinery and production lines and other kinds of machine tools, robots, transport machinery, measuring instruments, handling device and other liquid drive control as a wire, cable, gas hose protection device, can take on machine tools, machinery and equipment moving parts run harmoniously, can play a safety protection and the ability to guide, can prolong protected wire, cable, liquid, gas hose service life and reduce consumption, can greatly improve the machine tools, machinery and equipment of wire, cable, liquid, gas hose to confirm the unorderly situation existing in distribution, make it tidy and rules is arranged together, can enhance the overall artistic effect of machine tools.

Structure:

Drag Chain looks like the tank chain drag chain, consists of a lot of link. Link is composed of the up and down or so four sections, each section can open, convenient installation, open the cover plate after put in the cable, tubing, the trachea, etc.

Material and Performance:

Material: Reinforced nylon, good toughness and wear resistance, acid and alkali resistant ability.
Operating Life: Under normal use, up to 5 million reciprocating motion.

Drag Chain Selection:

High: Select the built-in cable, tubing, the trachea and conduit maximum height for reference, the height of the drag chain at least 10% of the remaining space.

Wide: Choose the built-in cable, tubing, trachea, the sum of its outer diameter for reference, the width of the drag chain at least 10% of the remaining space.

 drag chain structure

 Model No.

    Spec.

 Inside width

    (mm)

 Inside height

   (mm)

 Outside width

       (mm)

 Outside height

       (mm)

  bending radius

       (mm)

 Pitch

 (mm)

  No-support length

             (m)

TKA38

TKA38*60

60

38

91

61

75.100.125.150

69.8

4.5

TKA38

TKA38*75

75

38

106

61

75.100.125.150

69.8

4.5

TKA38

TKA38*80

80

38

111

61

75.100.125.150

69.8

4.5

TKA38

TKA38*90

90

38

121

61

75.100.125.150

69.8

4.5

TKA38

TKA38*100

100

38

131

61

75.100.125.150

69.8

4.5

TKA38

TKA38*120

120

38

151

61

75.100.125.150

69.8

4.5

TKA38

TKA38*125

125

38

156

61

75.100.125.150

69.8

4.5

TKA38

TKA38*150

150

38

181

61

75.100.125.150

69.8

4.5

TKA38

TKA38*175

175

38

206

61

75.100.125.150

69.8

4.5

TKA38

TKA38*200

200

38

231

61

75.100.125.150

69.8

4.5

They can be used as a component or service parts in glass machinery , handling and transport  machinery , painting and decoration equipment.Shoe-making machinery ,chemical machinery , textile machinery, welding machines, aut-omatic welding system, plastic machinery etc. The totally enclsoed type drag chains are the best choice for wood-working machineries and for the those locations where it is dustable.

Enclosed Type Drag Chain

Enclosed Type Drag Chain,Plastic Drag Chain,Cable Carrier,Cable Drag Chain,Cable Track

Hebei Hosan Machine Equipment Co.,Ltd , https://www.hosanmachinery.com

Posted on